Short communication · 29 Oct 2020
Conference abstractPublished 22 Mar 2018
Modelling and simulation in developing advanced materials and manufacturing techniques: Semisolid, laser processing and peening
University of London, UK
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
There are huge current effort is on-going to optimise the process parameters for advanced materials production and manufacturing processes. This talk concentrates on the semi-solid processing of Al-SiC metal matrix composites, laser glazing, laser cladding processes and ultrasonic peening. In semi-solid main parameters investigated was viscosity, stirrer diameters, stirrer type, size, shape, velocity, distance from the bottom of the crucible to achieve homogeneous distribution of reinforcement in the matrix by using Fluent. In laser glazing heating and cooling cycle was investigated to optimise the melt pool and heat-treated zone. Laser process parameters investigated are laser power, laser irradiance, pulse reputation frequency etc. In laser cladding heating and cooling cycle together with mixture of clad materials properties were investigated to reduce residual stresses by using Ansys APLD. From conceptual, analytical and finite element models, optimized process parameters can be predicted for reduced residual stress. In ultrasonic peening process parameters were optimised to get maximum depth for compressive residual stress by suing Abacus. Process parameters investigated are peening types, peening duration, distance from the peen tip etc. Simulation and modelling can play a strong role to get an in depth understanding of a new materials and manufacturing processes and also in their industrial development.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 19 Mar 2018
Additive manufacturing for heterogeneous catalysis: New challenges in material and process development
Commentary · 24 Dec 2024
Developing Next-Generation Multifunctional Materials: Combining Computational Modeling, Experimentation and Advanced Manufacturing
Conference abstract · 25 Mar 2019
Integrated analysis and quality control of laser-based additive manufacturing processes
Research article · 1 Sep 2022
Heat Treatment Effect on Microstructural, Mechanical and Tribological Properties of Nickel Aluminium Bronze Alloy Manufactured by Laser Powder-Bed Fusion Technique
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Sumsun Naher”

