Conference abstract · 17 Aug 2015
Conference abstractPublished 22 Mar 2018
Stress modification in praseodymium fluoride thin films through admixture with barium fluoride
Shanghai Institute of Technical Physics, Chinese Academy of Sciences, China
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Although some rare-earth fluorides were currently used in infrared antireflection as low-index evaporation materials in order to substitute for radioactive thorium fluoride (ThF4), the higher tensile stress presented in the layers will deteriorate the reliability and durability of the interference multilayers. Stress in the layers significantly influence not only the mechanical performance of interference multilayers such as thermal cycling life and fatigue properties but also their optical behaviors due to cracking or interfacial delamination. Most importantly, any bending or deformation of the substrate caused by stress will also affect the performance of the antireflection coatings. Therefore, the relief of the stress in the layers is a critical process. The stress in the film after the deposition process is the sum of three different types of contributions. First, there is the intrinsic stress evolving in the layer during deposition. Secondly, the thermal stress appears during the cooling process, caused by a mismatch between the coefficients of thermal expansion of the substrates and the materials deposited. Finally, the adsorptive stress occurs once the finished coating is open to air with the adsorption of moisture and impurities. The magnitude of stress can vary depending on the conditions of deposition. Since the substrate materials, deposition process, moreover, the difference between the deposition temperature and the ambient temperature, were completely controlled to be identical, only the contribution resulting from intrinsic stress is basically related to the chemical composition of the films. In our investigation, a new infrared low-index evaporation material, the admixture of praseodymium fluoride (PrF3) with barium fluoride (BaF2) was exploited. The stresses in thin films deposited on Si strips using electron beam evaporation from the sintered pellets of PrF3 admixed with a different amount of BaF2 were measured. It is disclosed that the stresses in the layers of PrF3 can be greatly reduced with the increasing amount of BaF2 in thin films.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 11 Jun 2018
Computational studies of ferroelectric composites and thin films containing polyvinylidene fluoride (PVDF) and graphene/graphene oxide
Conference abstract · 20 Mar 2017
Modification of structural and optical properties of PVA/PEG thin film by laser irradiation
Conference abstract · 19 Apr 2018
Low stress ZnO thin films for smart MEMS device applications
Conference abstract · 22 Mar 2018
Low stress ZnO thin films for NEMS fevice applications
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Bin Li”

