Article · 19 Feb 2026
Conference abstractPublished 22 Mar 2018
Low stress ZnO thin films for NEMS fevice applications
CSIR-Central Electronics Engineering Research Institute, India
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Role of oxygen partial pressure (RO2) on structural, optical and mechanical properties of nano-ZnO films has been investigated. Highly c-axis oriented ZnO thin films in nanometer rage were deposited at room temperature by RF reactive magnetron sputtering. It was found that stress is compressive in nature and varies in -0.06Ã?Â?109 dyne/cm2 to -2.27Ã?Â?109 dyne/ cm2 range, as a function of oxygen partial pressure. The stress measurement results are consistent and agreement with X-ray diffraction results. The in-plane residual stress strongly depends on processing parameters and nearly stress free nano-films can be obtained using optimal process parameters. The stressed film shows blue shift in band gap with increase of oxygen partial pressure. The observed variations in mechanical, structural and optical properties are correlated with film stress. Low stress, room temperate deposited piezoelectric nano-ZnO films are highly desirable for NEMS devices. Further, stresses relaxed ZnO thin film based devices are highly reliable, reproducible and exhibit enhanced performance. Yield and device life time can be improved by controlling film stress. In-plane stress primarily produced in ZnO thin films due to conditions imposed by underlying substrate and deposition process. Large in-plane stress can develop in ZnO thin films due to intrinsic or thermal stress. As known, MEMS devices are constituted of mechanical structures and composed of metal, dielectric and functional layers. The ZnO processing temperature must be lower to avoid multilayer inter-diffusion. Sharp, clean and crack free interfaces are highly desirable in NEMS. When NEMS devices exposed to higher temperature, there are possibilities to develop cracks due to mismatch in thermal coefficient of expansion (TCE) of constituent layers. Therefore, there is a need of low process temperature and stress relaxed ZnO film deposition which is established in present investigation.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Jitendra Singh”
