Scholars Central

Conference abstract

A semi-sequential actuator design for multipoint tools

Authors: Matthias Wimmer

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Multipoint tooling is a reconfigurable mold making technology that replaces solid moulds with an array of individually adjustable pins to create a discrete representation of the desired mould geometry. These pins have to be adjusted to very precise heights in reasonable time with manageable tool complexity to create a competitive new technology. Leadscrew driven pin actuation has proven to be precise, reliable and cost efficient. The height adjustment of the individual pins thereby can be either direct, with dedicated drives for each pin, or sequential, with one actuator used for all pins. A semi-sequential adjustment design is introduced to combine the advantages of both these designs. The passive, sensor less, pins in this concept are adjusted with an array of actuator devices. A setup algorithm ensures precise adjustment of each pin. The connection between the pins and the actuators is realized with a specifically designed form lock claw clutch. To ensure reliable function of this clutch the coupling process and parameters influencing coupling performance are analysed. Different methods of measurement are tested and evaluated to ensure the couplingâ??s performance. Subsequently sensitivity analysis is used to evaluate the influence of each parameter on the coupling performance and create a reduced parameter set. A Metamodell of Optimal Prognosis (MOP) is derived and used to optimize the actuator parameters. Finally, the robustness of the optimized system is tested. After parameter optimization, the design operates reliable and can reduce the total costs of a multipoint tool significantly. Recent Publications 1. Im Y T, Walczyk D F, Schwarz R C and Papazian J M (2000) A comparison of pin actuation schemes for large-scale discrete dies. Journal of Manufacturing Processes 2: 247â??257. 2. Simon D, Kern L, Wagner J and Reinhart G (2014) A reconfigurable tooling system for producing plastic shields. Procedia CIRP 17: 853â??858. 3. Li M Z, Han Q G, Cai Z Y, Liu C G and Su S Z (2014) Multipoint Forming, in Hashmi S. (Ed) Comprehensive Materials Processing. 3: 107â??147, Elsevier, Oxford. 4. LušiÄ? M, Wimmer M, Maurer C and Hornfeck R (2015) Engineering Framework for Enabling Mass Customisation of Curvilinear Panels with Large Surfaces by Using Pin-type Tooling: CIRPe 2015 - Understanding the life cycle implications of manufacturing, Procedia CIRP 37: 265â??270. 5. Wimmer M, LušiÄ? M and Maurer C (2016) Vacuum assisted multipoint moulding â?? a reconfigurable tooling technology for producing spatially curved single-item CFRP panels, Procedia CIRP 57: 368â??373.

Subjects

Engineering

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Journal of Applied Mechanical Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Applied Mechanical Engineering
  • SubjectEngineering
  • BylineArticles whose byline prints “Matthias Wimmer”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels