Review article · 2018
Conference abstractPublished 2 Aug 2018
Comparison of rectangular winglet type vortex generators in a square duct
Istanbul Technical University, Turkey
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Vortex generators, also called as turbulators are widely used in many industrial areas such as, automotive, aerospace, aeronautical, chemical engineering, power systems, air conditioning, refrigeration, internally cooled gas turbine blades, electronic chip cooling and other engineering applications. It is a new passive enhancement method that the heat transfer surface is altered to create secondary vortices which are carried through a heat exchanger by the core flow in order to reduce the wake regions. Those vortices enhance the heat transfer but on the other hand form pressure drop penalty relative to the smooth ducts. This research focuses on heat transfer enhancement using rectangular winglet vortex generators. For this purpose different volume flow rate for the duct entry region are specified and each of them examined in order to observe the effect of Reynolds number on heat transfer enhancement for both laminar and turbulent regions. Vortex generators are placed in the duct surface and mounted with attack angles of 15Ã?°, 30Ã?°, 45Ã?°, and 60Ã?°. Effects of each of them investigated. Pitch and blockage ratio are selected as 0.5. It was found that compared to smooth channel friction factor increases with decreasing attack angle of the vortex generators. This can be attributed to larger surface area, flow blockage and reverse flow and as expected heat transfer coefficient is significantly higher especially in 30Ã?° configuration of vortex generators. Also Nusselt number tends to increase with increasing Reynolds number. This is because vortex generators help to increase the flow turbulence degree and carry main flow to the near-wall regions where trapped flow can act effectively.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 19 Oct 2017
An Investigation of heat transfer performance of rectangular plate-fin heat exchanger by using common flow up & common flow down configurations of vortex generators with different wings attack angle
Conference abstract · 28 Sep 2017
Heat transfer enhancement in car radiators by using rectangular vortex generators
Review article · 2020
EFFECT OF ATTACKANGLE OF CONCAVE AND CONVEX WINGLET VORTEX GENERATORS ON HEAT TRANSFER AND PRESSURE DROP IN EVAPORATOR FIN AND TUBE HEAT EXCHANGER WITH FIELD SYNERGY PRINCIPLE USING NUMERICAL SIMULATION
Research article · 2014
Numerical Simulation of Air-water Bubbly Jet Issuing from a Square Nozzle by a Vortex in Cell Method
More from this journal
The newest in Journal of Aeronautics & Aerospace Engineering.
Research article · 17 Jul 2026
Numerical Analysis of Influence of Inward Dimples on Aerodynamic Characteristics of Symmetrical Airfoil Using CFD
Review article · 28 May 2025
Modelling of Hypersonic Flows and their Applications
Research article · 19 Apr 2025
Design and Multidisciplinary Analysis of Commercial Aircraft
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Aeronautics & Aerospace Engineering
- SubjectEngineering
- BylineArticles whose byline prints “Seyfi Girgin”

