Conference abstract · 19 Oct 2017
Conference abstractPublished 28 Sep 2017
Heat transfer enhancement in car radiators by using rectangular vortex generators
Istanbul Technical University, Turkey
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Statement of the Problem: There is an increasing demand for more powerful engines in relatively small spaces which creates a problem of insufficient rates of heat dissipation in automotive radiators. Heat absorbs considerable amount of energy about 30% generated by the engine. Inadequate heat dissipation can result in the overheating of the engine, and that causes corrosion and metal weakening of engine parts. To minimize the stress on the engine because of heat generation, automotive radiators must be redesigned. The purpose of this study is to minimize the stress on the engine and lighten automotive component because of heat generation, and to make automotive radiators more compact while maintaining important level of heat performance. Compactness plays significant role in heat exchanger performance; economy in manufacturing and operating costs, energy conservation and for ecological reasons. Methodology & Theoretical Orientation: Heat transfer increases as we increase the surface area of the radiator fins. Modern design can dissipate the same and/or more heat by using vortex generators in radiator fins. Rectangular vortex generators disturb the flow field and provide swirling flow which causes a heavy exchange of core and wall fluid. Findings: Vortex generators decrease the wake region size and increase the intensity of secondary flow. The channel with the rectangular vortex generators increases the heat transfer performance of radiator about 55.8% compared to rectangular channel without vortex generators. The parameters of vortex generators have large effect on heat transfer performance. Length, height, and wings angle attack play a key role in determining the heat transfer performance. For the studied case better performance obtained when wings attack angle was 450 and vortex generatorsâÂ?Â? height and length was half of the channel height and length.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Review article · 2018
Experimental Investigation of Heat Transfer Enhancement from Pin Fins with Delta Winglet Vortex Generators in Square Channel
Research article · 31 May 2015
Numerical solution of convective and radiation heat transfer from a vertical rectangular fin
Research article · 18 Jan 2012
Effects of thermal radiation and magnetic field on heat transfer in a micropolar fluid along a vertical stretching surface with a variable viscosity and internal heat generation
Conference abstract · 2 Aug 2018
Comparison of rectangular winglet type vortex generators in a square duct
More from this journal
The newest in Advances in Automobile Engineering.
Research article · 13 Jan 2025
Number of Failures during the Piston Ring Manufacturing Process
Perspective · 26 Dec 2024
The Role of Engine Design in Enhancing Combustion Processes
Perspective · 26 Dec 2024
Fuel Economy: Balancing Efficiency and Environmental Impact
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalAdvances in Automobile Engineering
- SubjectEngineering
- BylineArticles whose byline prints “Seyfi Girgin”

