using workability tests such as slump flow, V-funnel and L-Box tests. The compressive strength of the cubes at 7 days, 28 days are also obtained ... found that the mix have good compressive strength at 10% replacement
problem. Hence the investigation was carried to study the effect of metakaolin addition on compressive strength and rapid chloride permeability of concrete. The tests were carried out on concrete specimens ... cement by…
terms of viscosity and workability. And the mechanical properties of hardened concrete such as compressive strength were also determined. The sustainable Conventional Concrete (with 20% class F-fly ash & recycled…
degree of the effectiveness of Mucuna solannie as an extender, fluid loss control, retarder, compressive strength to cement slurry were also tested; and their results were then compared with that ... Mucuna solannie at…
eight. The properties of the produced geopolymer bricks have been studied through measurement of compressive strength, water absorption, FTIR, XRD and SEM imaging. Results demonstrate the possibility of using alkali…
Geopolymers are inorganic polymers; they have high compressive strength, low drying shrinkage, good fire resistance and superior durability in the aggressive environment compared to Portland cement concrete. Geopolymers…
Na2O/Al2O3: 1.48–1.84, Na/Al: 0.74–0.92. The maximum compressive strength was observed for the geopolymer containing no fly ash, 28 Mpa at day 1 and dry sample ... geopolymer containing 10% FA showed promising results…
chloride (NaCl2) solutions for 12 weeks. The effect of Metal alkali type on the compressive strength values, visual inspections, weight and elevated-temperature exposure of the samples were determined ... samples…
Specifically, the experiments that have been done in mechanical and chemical properties that cover compressive strength, tensile strength, Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD) analysis. The…
solutions were mixed with the MTA powder with various L/P ratios. The compressive strength, micro-hardness, washout resistance, structural analysis by SEM and Fourier Transform Infrared spectroscopy and biocompatibility…
optimum solid to liquid ratio with the corresponding sonication time, slump and the compressive strength of nano silica and nano clay concrete were examined and compared with those without nano ... clay. In addition…
green body during compaction. Enhanced green properties can consequently lead to higher fired strength of the varistor discs. The binder system is anticipated to have an influence on the grain ... physical properties…
sintering at 400°C. The results showed that with additional alloying element, micro-hardness, compressive strength and corrosion resistance of composites are significantly enhanced compared with Mg-HA composite…
properties of mineralogical composition, water absorbtivity (WA), apparent porosity (AP), bulk density (BD) and compressive strength (CS) of twenty four different types of contemporary (17 samples) and ancient (7…
plastic powder as partial replacement. Specific weight, thermal conductivity, water absorption capacity, porosity and compression strength of bricks are tested. The overall results show the usability and feasibility…
samples were evaluated by in vitro test in simulated body fluid (SBF). Density and compressive strength of glass samples were measured. Results indicate that with the partial substitution of TiO2 ... glasses were found…
properties at room temperature were measured using a universal testing machine (Ametek, Lloyd). The compressive strength was determined by ASTM D 1621 at a crosshead speed ... required for 10% deformation based on the…
H2O2 and Ce(SO4)2.4H2O on the properties of density and compressive strength of foamed concrete was investigated respectively, as well as the additive of rare earth ... that foamed concrete with the properties of…
with increasing peroxide amount from0 to 5 wt.%, respectively. On the other hand, the compressive strength of the final sintered samples was found to be highly retarded with increasing peroxide ... suitable porosity and…
bagasse ash are prepared. Tests are conducted for workability, flexure, modulus of elasticity and compressive strength of the mixes. The study concluded that mix which contain 10 mm size styrofoam ... compact and place…
study using white clay, industrial alumina, and varying amounts of Si powder. The ceramics' compressive strength, alkali attack resistance, and thermal conductivity were evaluated in relation to the SiC whisker…
this study is to investigate the compressive strength and workability properties of polymer modified concrete. In this work two different types of polymers are used at different dosages to modify ... also examined. The…
Civil infra-structural designs now need a new dimension, different from conventional strength and reliability approaches in that they are less energy intensive and ecologically sustainable. This brought ... conditions…
evaluated. Special polymerized sulfur composite impregnation of lean concrete and cement mortar increases its compressive strength from less than 1/3 to 1-1/2 times that of high strength ... materials such as blocks and…
contents (35 vol %, 40 vol %, 45 vol % and 48 vol %). The density and fracture strength of the samples after sintering at 1250 Ã?°C for 3 hours increased remarkably with ... were created. The porous CaP scaffolds showed…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.