methods have been used to prepare high quality ZnO thin films, such as, magnetron sputtering, metal-organic chemical vapor deposition, pulsed-laser deposition, molecular beam epitaxy and electrodeposition. Among these
solution with the addition of calcium compounds to high supersaturated state and RF magnetron sputtering (13.56 MHz) of the target made of synthetic hydroxyapatite. 16 different types of coatings were
rotation in single crystalline Fe thin films, deposited onto MgO (100) substrates by magnetron sputtering, with thicknesses, tFe, varied within the range from 70 Å to 250 Å. The crystalline
amorphous Ge2Sb2Te5 (GST) was first deposited on cleaned silicon substrates by using DC sputtering process. The GST film is then irradiated with the femtosecond laser pulse directly through the photomask
While solution processed random network is coated on glass substrate, proton ion beam induced sputtering of atoms from nanowires lattices followed by point defects production and accumulation at crossing sharp
chips’ sensing surfaces are fragile as they consist of a thin layer of gold sputtered directly on a polymer slide, without the Cr or Ti adhesive layers typically used
deposited onto a Ti-6Al-4V substrate using physical vapor deposition (PVD) magnetron sputtering for the primary layer at varying DC power, temperature and substrate bias voltage values. Consequently, nanotubes
1970s it was shown that MeV heavy ions efficiently sputter insulating targets. An analysis technique based on this, Plasma Desorption Mass Spectrometry (PDMS), employed Cf fission fragments as a source
layer of gold was deposited as a catalyst on the titanium layer by a sputtering method. At this stage, the sample was placed in a quartz tube furnace. A tablet
pure spin current. Building on the high-quality Y3Fe5O12 (YIG) films grown by our sputtering technique and the large inverse spin Hall Effect (ISHE) signals enabled by these films
devices. The PZT thin film, deposited on Au structural layer using RF magnetron sputtering method, was poled and driven with inter digitated electrodes (IDE) to exploit d33 mode actuation
dielectric properties of Ba(Zr0.4Ti0.6)O3 (BZT) thin films deposited by RF magnetron sputtering on MgO and LaAlO3 single crystal substrates for the microwave tunable devices application. The crystallinity
deposited on Al2O3 (11-20) and MgO (100) substrates at elevated temperatures by magnetron sputtering are investigated. X-raydiffraction along with pole figure measurement reveals the presence of orthorhombic phase
different shapes (spherical, acicular or rod-like).. In parallel, thin films synthesized by rf-sputtering exhibit well textured surfaces with nanocrystalline islands. Relevant experiments were performed for exhaustive…
PACVD method using silicon-organic precursors, and the other on reactive magnetron sputtering of metallic chrome target in an active atmosphere containing pure acetylene or acetylene-nitrogen mixtures of different
applied both for fine ion cleaning and activation of substrates before deposition and for sputtering. One particularly interesting result of this background work was observation of the essential positive potential
observed for ZnO nanowires coated with Al and Ni nanoparticles by radiofrequency magnetron sputtering, while the samples coated by e-beam evaporation showed quenching of the PL intensity. The electrostatic
this work, a magnetron sputtered PVD coating is done on the extracted samples in the form of plate from the Beater mills which is available in Neyveli Lignite Corporation
mask lithography. After co-deposition of Al2O3 and SiO2 with the help of sputtering then finally characterization has taken place. In this characterization, Scanning electron microscope (SEM) images are taken
NiFe/Au/IrMn structures. A magneto-resistive sensor can be fabricated using a standard sputtering deposition method directly on Si substrates resulting in huge offset suppression. Research
After 48 hours at 37°C and 95% relative humidity, the samples were surface-sputtered with gold and analyzed using SEM at 5000X magnification. Their chemical composition and element distributionwere
imaging and the distribution of the components in the GSR particle before and after sputtering are studied. Lead and its oxide are more concentrated in the surface of the particle
both for fine ion cleaning, activation and polishing of substrates before deposition and for sputtering. One particularly interesting result of this background work was observation of the essential positive potential
applied on H13 steel samples was development using the plasma assisted unbalanced magnetron sputtering technique and varying the nitrogen content between 22 and 41%. The influence of nitrogen content
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.