deposited amorphous Indium–Zinc Oxide (IZO) thin films by radio frequency (RF) magnetron sputtering from a In2O3–10 wt.% ZnO sintered ceramic target to optimize the RF power, argon
have been utilized for depositing erbium-ytterbium silicate films include the sol-gel method, sputtering and pulsed laser deposition. Compared with other deposition methods, magnetron sputtering has the advantages…
been utilized for depositing erbium-ytterbium silicate fi lms include the sol-gel method, sputtering and pulsed laser deposition. Compared with other deposition methods, magnetron sputtering has the advantages…
this work a modified Freeman Ion source, used for ion sputtering, is designed and constructed. The choice of this ion source was based on its remarkable success in the semiconductor ... source were closely monitored…
Objective: The aim of this study is to evaluate the effect of fusion sputtering surface treatment on the micro shear bond strength of zirconia and MDP-containing resin cement. Materials ... following treatments…
film deposited by mid frequency reactive magnetron sputtering process on aluminium alloys surface, which can improved the color of aluminium alloys. Use International Commission on Illumination ... photoelectric…
alloy have the poor corrosion resistance. ZrN film deposited by mid frequency reactive magnetron sputtering process on aluminium alloy surface in order to improve the corrosion performance. Study the influences…
thick (100nm, 125nm, 150nm) composite coatings were coated on steel substrate by RF magnetron sputtering technique. The required targets used in sputtering were fabricated indigenously by compacting a mixture…
this paper, the dye ability of polyester/wool fabrics after plasma sputtering treatment was investigated. The polyester/wool fabrics were sputtered by copper particles. The natural dye (madder and weld ... results show…
High intensity glow discharge technology such as high-power impulse magnetron sputtering (HiPIMS) has been proven to produce highly ionized metallic deposition particles. The charged ions have nice energy…
highly crystalline MoS2 nanoflakes consisting of vertically grown edge exposed layers using DC magnetron sputtering technique. To understand a correlation between microstructural and material properties, we have been…
doped ZnO (FeZO) thin films were deposited using magnetron co-sputtering (DC for Fe and RF for ZnO) on silica and silicon substrates. To better control the Fe-doping ... power (which produced instabilities of the DC…
Objective: The aim of this study is to evaluate the effect of fusion sputtering surface treatment on the micro-shear bond strength of zirconia and MDP-containing resin cement. Materials ... following treatments…
plasma polymer fluorocarbon (abbreviated as PPFC) thin films using the mid-range frequency sputtering process. Large-area PPFC thin films were fabricated on roll-type PET substrate (polyethylene terephthalate, width…
thiswork, Ti(C,N) coating have been deposited byRF reactivemagnetron sputtering (13.56MHz).We’ve been studied the effect of the nitrogen partial pressure and the substrate bias voltage ... properties of titanium…
substrates were pre-seeded with ZnO by a technique of radio frequency (RF) magnetron sputtering. The influences of sputtering power, annealing treatment, and the size of seeds on the morphologies ... readily tuned by…
pulsed-dc power supply has been designed and constructed for used in a magnetron sputtering system and for thin film synthesis. The power supply consists of three major parts ... constructed power supply can be used as…
application and characterization of nanocoating by physical vapor deposition with pulsed magnetron sputtering (PVD-PMS) and other materials with hydrophobic and photocatalytic behavior. The treated and untreated…
cylindrical magnetron sputtering device is designed and its characteristics are studied. The device consists of two copper cylinders with 1.5 and 5 cm in radius and 20 cm in length
prepare ZnO:Al thin films with good crystallinity by helicon wave excited magnetron sputtering method and aimed to establish conditions for preparation. ZnO:Al thin films prepared by this method
spinodal transformation. Pure thin films of Co1.7Fe1.3O4 spinel iron cobaltites were prepared by rf sputtering. The two-phase spinels obtained through the spinodal transformation were evidenced after annealing
required. The growth of CuCrO2:Mg delafossite thin film on quartz substrate by rf sputtering is first reported in this work. The deposition leads to a nanocrystalline phase. Delafossite characteristic
were and were manipulated to form amorphous, crystalline, preferred structures by RF magnetron sputtering and dedicated parameter control. Through input power and source gas ratio modulation, TaN with…
useful for plasma diagnostics. Several functional films were fabricated using a facing target sputtering (FTS) system. During the sputtering process using the FTS system, high-energy ionized particles are confined
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.