then they were washed with distilled water for five minutes. Next microhardness testing and surface roughness testing were applied to all speciments. The data were evaluated using SPSS 15.0 soft ... statistically…
from 0 to 1.5. The membranes prepared were characterized with respect to chemical structure, surface roughness and structural morphology using FTIR, AFM and SEM-EDX, respectively. The effects ... attributable to the…
optimized formulation. Non-solvent addition coacervation method was used for the preparation. Response Surface Methodology (RSM) was applied for modified release formulation optimization. Solid state study was conducted…
three performance characteristics such as rate of material removal, wear rate on tool, and surface roughness value on the work material for machining Mild Steel IS 2026 using copper electrode ... objectives of higher…
scanning electron microscopy (SEM). The density, mechanical strengths, residual ash content, dimensional precision, and surface roughness of the various PHPC SLS parts were measured and analyses. Through the tests…
cemented to titanium implant abutments and tested using micro indenter. Crack length, hardness and surface roughness for all specimens was evaluated which was then utilized to calculate fracture toughness. ANOVA…
compared. Before and after immersion, samples and their geometrical characteristics were analyzed by surface roughness analysis, Scanning Electron Microscopy and optical microscopy observations. Mechanical and chemical…
practice of pollutant dispersion modeling. Friction factor f, as a measure of surface roughness in engineering flows, has been adopted to parameterize street-level ventilation using both large-eddy simulation…
micrograph images aqcuired from field emission scanning electron microscopy illustated an increase in the surface roughness of the composite films owing to the compact structures of such composite films which
responses considered to evaluate the damage are bone drilling temperature (T), thrust force (F), surface roughness (SR) and the percentage of the mechanical damage around the drilled hole (MD). Principal ... 90Ã?° drill…
functional group analysis of the peaks obtained. AFM analysis showed a decrease in surface roughness of the 2-I-Imz sample as compared to the 2-Cl-Imz, indicative
dermatological evaluation secondary to the present of a nodular plate of 2 × 2 cm, rough surface and irregular edges, warty aspect, associated with mild pain without bleeding. At this time ... male with no relevant…
results confirmed that the fabricated DNA-NPS was interconnected and uniformly porous, with a surface roughness of 0.125 Ã?± 0.08035 nm. The elastic modulus
area does not necessarily lead to practically low capacitances due to factors such as surface roughness, poor sealing and potential microfractures leading to a significant variation in experimentally observed capacitance
solid surface, implying that the presence of the micro-porous holes possesses low effective surface roughness and it is an effective method to manipulate the turbulent boundary layer. The optimum
material variety for scaffold fabrication with the possibility of controlling accurately their microarchitecture and surface roughness to increase matrix functionality. Moreover, the use of 2PP in combination with other…
concepts via a principle scale dependent accessibility with respect to input parameters from measurement, surface roughness or even non-continuous composition, one does not only overcome such flaws
compressive strength were enhanced achieving better than the level of ISO standard and the surface roughness profile were identical to cGIC This enhanced cGIC exhibited a significantly lower water sorption
Subsequently, post-irradiation evolution of microstructural features, such as matrix grain size, pores, cracks, surface roughness and corresponding flexural responses were recorded and contrasted
developed WO3/TiO2 heterojunction has a uniform thickness of ~12 nm with a relative rough surface. The SC electrode based on this heterojunction has shown excellent super-capacitive behavior with
shiny opaque white, and OS-G was chalky white with a rough surface. Pharmaceutical characteristics of ARP-G were demonstrated to be suitable for hospital formulations, and ARP-G could
sorbent was prepared and its morphology evaluated. The sorbent had a round shape and rough surface with a particle size of ≤63 μm. Batch adsorption experiment was conducted to examine
different tests" tensile strength, hardness(Rockwell) test, dimensional accuracy test, color change by spectrophotometry, surface roughness, water sorption, residual monomer release "FTIR" and "NMR". Results: the…
Findings: LDs have been found to be closely associated with the convoluted rough-surfaced ER membranes and even with the lumen of these structures probably to facilitate a non-vesicular
size bring forth problems in contact formation and device fabrication due to the large surface roughness. Consequently, there is a need to fabricate nanocrystalline films with small grain size
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.