optimized to the optimum separation/pre-concentration conditions of analytes, including the effect of pH, capacity of the solid, equilibration time and coexisting ions; afterwards, the solution was filtered…
using potassium persulphate as free radical initiator in aqueous solution. Glycidyl methacrylate was grafted for five different concentrations using the optimum grafting conditions evaluated for acrylic acid alone onto…
H2O2, ratio of H2O2/FeSO4, solution pH and concentration of Na2SO4 was investigated on degradation of 2-NSA by homogeneous Fenton oxidation. The optimum conditions were obtained ... reaction time, H2O2/FeSO4 of 10…
gases. Thus, it is concluded that the 5% concentration of the NaOH was found to be optimum. pH of the solution should be alkaline for good absorption of SO2. Maximum
initial concentration of Reactive Red 195 dye in solution, the optimum process parameters were found to be 1.25 g of activated carbon dosage at 30°C for 75 minute
BB01 encapsulated in different chitosan solution pH (5, 5.3, 5.6 and 5.9) ,in different chitosan concentration (0.4%, 0.7%, 1.0% and 1.3%), in different xanthan concentration ... bifidum BB01 significantly, and the…
heavy metals from aqueous solutions. In this study, the removal of Chromium and Nickel ions by Opuntia, a natural polyelectrolyte was investigated. The working concentration of metals used in this ... optimum conditions…
removal of toxic Cr(VI) from aqueous solution. The adsorption of Cr(VI) was found to be time and concentration dependent. Maximum Cr(VI) removal (≈ 66%) was achieved with just ... 100mg of the adsorbent with an optimum…
initial concentration of phosphoric acid solutions was studied. The clays used in this study were effective for aluminium elimination, the optimum initial concentration of phosphoric acid was found
Particle swarm optimization (PSO). kc and DS¬ values for runs with different initial concentrations, dosages and agitation were estimated. The variability in the estimated parameters and their implications were analyzed…
found in Na-rich solution at 500 hr of interaction time whereas in case of silty-clay sample the optimum concentration was found at 300 hr. However silty-clay samples ... mobilizing F from sediment matrix. Experiment…
been studied. Some parameters were donesuch as pH effect, solution concentration, contact time, biosorbent mass, and particle size. The optimum conditions for Cd ion were at pH 5, concentration
between 81.98% and 63.8% depending on initial fluoride concentration in 6 hrs contact time. Results showed the optimum solution pH as 7.0 and adsorbent dose
Nickel and Copper from their single and binary solutions. The optimum conditions such as pH, initial metal ion concentration, contact time and biomass dose were determined experimentally
solution temperature. The optimum operating conditions that caused maximum water loss and minimum solute gain were found to be at solution temperature of 65.8°C, salt concentration
preparation of good color gold solution. In addition to this, freshly prepared (within one week shelf life) anti-CTN mcAb gold conjugated and optimum concentration of coating antigen were
H2O2, dosage of NZVI, solution pH and concentration of coexisting ions was investigated on degradation of H-acid by heterogeneous Fenton-like oxidation. The optimum conditions were obtained ... reaction time, dosage of…
process variable temperature and concentration has remarkable effect on responses. Optimization of the osmotic dehydration process was performed to result maximum water loss, solute gain, overall acceptability and total…
process variable temperature and concentration has remarkable effect on responses. Optimization of the osmotic dehydration process was performed to result maximum water loss, solute gain, overall acceptability and total…
milli Q water, at three different buffer solutions of pH 4.0, 7.0 and 9.0 under direct sunlight at two different concentrations. The optimum concentration of catalyst required for the complete ... herbicide in neutral…
could be removed by this method. 30% solution at 7000 g was found to be optimum for the purpose. Further, it is concentrated to 85% total suspended solids (TSS). Upon
simulated solution of lead (II). The removal of lead (II) using AIP has been optimized by Response Surface Methodology (RSM) using Design Expert Software 8.0.5 considering initial concentration of lead ... response. The…
peroxide in the leaching solution, temperature, stirring speed and solid/liquid ratio were investigated to determine the optimumleaching conditions. Optimum leaching conditionswere identified as: concentration of…
effluent . The effect of variation of initial concentration of dye solution on the adsorption of dye from an industrial effluent, the optimum contact time for effective adsorption ... with ACM in 180 minutes of…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.