measured which includes electrolyte resistivity and the balance voltage. Besides it, an optimum solution concentration to obtain the best process accuracy of the electrochemical micromachining is determined. The research
osmotic solution concentration (20, 40 and 60)% w/w to ascertain the optimum dehydration performance of the process. The performance efficiency of the process was evaluated at different osmotic solution ... parameters…
DMSO. Polarographic oxidation of DMSO in 0.1 M HCl, 0.1 M CH3COOH solution using optimum concentration of fuchsin, methyl red, thymol blue as surface active substances is followed to determine
Four Alfisols in Benue state were examined to determine the solution phosphate concentration required to obtain optimum yield of soybean with the view of employing the SPC as a tool ... digested in a 4:1 HNO3:HClO4…
function of contact time, initial solution pH, initial dye concentration and temperature. The optimum initial solution pH was found to be pH 2.2. Kinetic analysis revealed that adsorption experimental data
that gave 0.025, 0.05, 0.075, 0.100, 0.125, 0.150, 0.175, 0.200, 0.225, 0.250 mg/kg solution concentration and the buffering capacity were estimated from adsorption curves. In the greenhouse ... digested in a 4:1…
process variables for osmotic dehydration process were osmotic solution concentrations (40-60oBrix sugar), osmotic solution temperature (40-50?C), solution to fruit ratio (1:4 v/w), and process ... process was optimized…
than the surfactant solution and much more than reservoir brine. The optimum concentration of silica NPs in surfactant solution is determined to achieve in highest IFT reduction. Also, contact angle
using a spray pyrolysis technique. The preparative parameters such as solution concentration, substrate temperature, quantity and pH of solution have been optimized using photoelectrochemical (PEC) technique. The PEC…
determined from the analysis of variance (ANOVA). The optimum conditions obtained for the single solute system were pH of 7.99, adsorbate concentration of 2.02mg/dm3, solid: liquid ratio ... removal efficiency of 99.79%…
density, the flow rate, and the oxidant concentration, the optimum conditions were found to be as follow: permanganate solution concentration is 6.0X10-3 M, current density
adsorption experiments were performed as a function of pH, contact time, solute concentration and adsorbent dose. The optimum pH required for maximum adsorption were found to be 6.0.The experimental equilibrium
pharmaceutical formulation. Effect of various parameters, pH, metal ion concentration, drug concentration of solutions is studied. The optimum condition are established for the determination of Iron(III) and the drug
change of absorbance at 425 nm in ethanolic sodium hydroxide solution. The optimum operating conditions regarding concentration of reagents and temperature were established. The initial-rate method is adopted
ions in solution, representing the initial concentration, contact time, and temperature. At these optimum conditions, the sorption yield, sorption capacity and the coefficient of determination were evaluated as follows
using unglazed porcelain. The optimum dose of unglazed porcelain adsorbent can remove 96% Pb, from aqueous solution containing 10 mg/l of initial concentration. The effect of pH range ... waste. The data collected…
copper ions participating the crystal lattice of CeO2 to form solid solution. The results show that the optimum concentrations of CuO and CaO mixed oxide
enough to remove 91% of 10 mg/l initial copper ion concentration from 100 ml metal solution. The optimum biosorption capacity was at pH 6. The equilibrium adsorption data
oxidation current registered has been successfully related to the concentration of OTA in solution from different samples. Under the optimum conditions of the experimental variables, precision in terms of reproducibility
mass of adsorbent, initial dye concentration, presence of crowding agent and salinity were studied to maximize the adsorption of the dye from aqueous solution in discontinuous experiments at room…
concentration of lead and temperature of aqueous solution are studied in this work. The maximum bio-sorption of lead is attained at an equilibrium time of 60 min. The optimum ... fitted well to the experimental data…
moisture content and dry matter content, sugar solution is more effective whereas in the case of rehydration ratio salt solution is best. Therefore applying a combination of these osmotic agents ... effect more. The…
concentration was more significant on the water loss than the effects of processing time and solution to sample ratio. The osmotic dehydration effect was optimized for water loss, solute ... gain, and weight reduction…
study was carried out to investigate the feasibility and optimum conditions of removal of lead and cadmium ion from aqueous solution using ion exchange resins obtained from sugarcane bagasse ... chemical modification…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.