nanoscale or reduce the feature size and dramatically increase the aspect ratio of imprinted microstructures. The shrinkage capability of embossed microstructures is obtained by molding at low temperatures for less…
solutions have been established for temperature distributions. Subsequently the corresponding thermal stresses, residual stresses, microstructure, build distortion, and mechanical properties are expressed as explicit…
zone (LFZ) method, including identification of the appropriate treatment conditions and main structural and microstructural factors affecting the thermoelectric performance. Known that Nb and La substituted calcium…
amorphous alloys were manufactured by melt-spun technique. The evolution of crystallization, microstructure, mechanical and electrochemical properties of the alloys was investigated by DSC, XRD, TEM, micro-indentation…
alloys cannot always acquire appreciable improvement with their monotonic strengths. However, tuning the microstructures to harvest a recrystallized nanostructure can significantly enhance the fatigue strength of NS…
present study, a microstructure-based finite element model for a two phase titanium aluminide alumina cermet is proposed based on a modified Gurson model. A face-centered cubic unit cell ... validate the modelling…
conversion efficiency of quasi-solid electrolytes incorporated solar cells depends strongly on the polymer microstructure used in formulating the redox electrolyte and our polymeric materials showed photovoltaic…
conversion efficiency of quasi-solid electrolytes incorporated solar cells depends strongly on the polymer microstructure used in formulating the redox electrolyte and our polymeric materials showed photovoltaic…
storage processes. A large internal surface area strongly improves heat and mass transfer within microstructured reactors developed at IMVT. Due to their compactness compared to industrial reactors, they operate
subjected to advanced thermo mechanical processing. The unique combination of processing parameters and microstructural phenomena i.e., combined metal forming consisted of cold rolling and subsequent thermo mechanical…
loading patterns. The tests were performed under different stress levels and different speed conditions. Microstructural observations, using optical microscopy and secondary electron microscopy were carried out…
fatty tissues. Every year, the manifestations of antemortem and postmortem pathological changes in the microstructure of animal muscle tissue are increasingly noted. Moreover, the affected structures of muscle fibers
Engineering to produce useful duralumin pieces. The study process included: washing, drying, grinding, microstructural and morphological characterization, compaction, sintering and finally, microstructural and…
work was carried out to investigate the effect of high shear treatment on the microstructure and mechanical performance in the fabrication of magnesium and aluminum alloy matrix particulate nanocomposites…
order to determine the influence of the excess alumina on the microstructure. The SEM micrograph of mullite sample containing 60 wt% alumina sintered in SPS at 20-minute holding time
study, a clear case of the effect of post-production processing and its consequent microstructure and effectual changes in mechanical properties of a commercial Aluminum 6063 alloy is presented
multilayer duplex Ni-P/Ni-W-P coatings; as well as the observed microstructural and tribology behaviour changes between the as-deposited and laser treated coatings. The coatings were obtained
bioactive and the second resorbable. The eutectoid material is formed by lamellae type microstructure of alternate layers of silicocarnotite and α-triclacium phosphate. The eutectoid material, in vitro esperiments…
properties of nanocomposites are affected by a wide number of parameters relating to the microstructure due to the embedding of the nanoparticle inside the polymeric matrices. The present work
research discussed in this work are: Orientation optimization of anisotropic reinforcements by a microstructural design Development of composite materials with mixed reinforcement (GF+FC) to evaluate the influence
situ MMC composite materials, the fabrication conditions will be correlated with the microstructures of the interfacial zones and the physical properties of the MMC materials. In situ formation
leads to a decrease in the size of nanotube aggregates and changes in their microstructure. It was found that after two weeks in deionized water nanotube aggregates remain stable
prepared by conventional ceramic method. This is attributed to the control over composition and microstructure by sucrose method. On account of high resistivity and low eddy current losses, these ferrites
presence of functionalized MWCNT. The prepared PANI/MWCNT is investigated by several techniques including microstructure characterizations using scanning electron microscopy (SEM), high resolution transmission electron…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.