parameters of copper selective leaching including types of leaching solution, acid concentrations, and liquid-solid ratios were systematically studied. The optimum selective leaching conditions were
parameters of copper selective leaching including types of leaching solution, acid concentrations, and liquid-solid ratios were systematically studied. The optimum selective leaching conditions were
some parameter test such aseffect of pH solution, initial metal concentration, contact time and biosorbent mass were studied. The optimum conditions forMuntingia Calabura L leaveswere obtained at pH 4, initial
trichloroacetic acid (TCA) assay method. The optimum conditions for maximizing the production of protein hydrolysate are 2% concentrated solution of sodium alginate, an incubation time of 24 hours, five grams
effect and optimum concentration of Jatropha curcas, Psidium guajava and Andrographis paniculata single leaf extract (SLE) and double combination leaf extracts (DCLE) on postharvest performance of cut Mokara Red orchid…
salt solution concentration with temperature and temperature with processing time for WL (p > 0.05) were the most important factor that affects the osmotic dehydration of coconut slices. Optimum conditions ... predicted…
minutes at RT and 140 RPM. The optimum dose is 1.00 g for 50 mL aqueous Cd(II) solution which concentration was 10 ppm. IR spectroscopy analysis showed that carbonyl
preparation was result after fixing the optimum conditions of concentration and (pH). UV-Visible spectra of these complex solution were studied for a range (pH) and concentration which obey Lambert
column method. Several parameter such as the solution of pH, initial concentrations, particle size and flow rate were studied. The optimum condition for adsorption of Cu(II) were
used. The concentration of silver nitrate and ascorbic acid was set at 3.0 x 10-4 mol L-1 and 6.0 x 10-4 mol L-1, respectively. The reaction ... After 5 min of heating, the solution color changed from colorless to…
adsorption of Ce3+ and Nd3+ from aqueous solution in a batch mode was studied under optimum adsorption conditions; Ce3+ and Nd3+ concentration 100 mg/l, pH 3.5, adsorbent dosage ... removal of rare earth metal ions. The…
Particle swarm optimization (PSO). kc and DS values for runs with different initial concentrations, Dosages and Agitation were estimated. The variability in the estimated parameters and their implications were analysed…
optimum solution pH for adsorption of both metals from aqueous solutions was 6. Adsorption was rapid and occurred within the first 20 min for both metals within different solution concentrations
from aqueous solutions using Luffa cylindrica fibre biomass was investigated as function of pH and initial metal concentration. An optimum pH of 4 was obtained for all the metal systems ... best described by Langmuir…
coagulant dosage, dye concentration and time. Acidic solution pH increased the Total dissolved solid (TDS) removal efficiency. Accurate control of coagulant dosages gave optimum destabilization of charged particles…
found that dye degradation is dependent on concentration of Acid Violet 90, FeSO4, H2O2 and pH of the experimental solution. The optimum condition for the photodegradation of dye was established
production experiments were conducted in aqueous solutions of methanol, ethanol and 2-propanol under light illumination with an optimum alcohol concentration of around 2.0 M. The hydrogen production yields follow
toxin and patulin in aqueous solution were investigated at different conditions. The degradation kinetic curves, kinetic models and the optimum process conditions were evaluated. In order to investigate the efficiency…
Based on the experiment, optimum condition for adsorption Zn (II) ion was pH 6, biosorbent dosage at 0.25 g, initial concentration of metal ion solution 2400 mg/L and contact
between pH 4.0-8.0 solution for 12 h, better tolerated methanol. Jatropha oil as raw material, lipase Bilesu Lp100 as a catalyst, the optimum process conditions: alcohol to oil molar ... ratio 1.72:1, lipase…
encompass natural can be formulated at an optimum concentration of 40 µg/ml of cisplatin entrapped in 2 mg/ml of aqueous solution of gumghatti in the presence of formaldehyde
indicate that dye degradation is dependent on concentration of Dye (RY86), photocatalyst (Fenton reagent), H2O2 and pH of the experimental solutions. The optimum conditions for the photobleaching
technique using single diffusion method. The optimum growth conditions were established by various parameters such as pH of gel solution, gel concentration, gel setting time, concentration of reactants etc. Crystals
grown by a single diffusion method. The optimum conditions were established by varying various parameters such as pH of gel solution, gel concentrations, gel setting time, concentration of reactants
follow: catalyst amount; 0.16gm/L, concentration of the dye solution; 10 ppm, pH of solution; 9.3 and 6% H2O2 solution under these optimum conditions, the obtained degradation efficiency
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.