present study composites based on polylactide and hydroxyapatite with the content of components 50:50 and 75:25 were investigated. Components were mixed at 40°C, which was followed ... sonication procedures and its…
Binder-jet 3D printing responses of sea-shell powder based ceramic composites have been evaluated considering the material consolidation mechanisms and mechanical characterisations. Initial experimental printing trials…
total peak number, total peak area and total peak height were studied. The Central Composite Design (CCD) was used to design experiments and study the effects of four factors
important development in this issue is nanotechnology and biopolymer based Nano composite films, prepared with this technology. Nanotechnology gives the researchers the chance to change the structure of the materials…
Many different compounds and polymer composites area unit used for engineering applications during which friction and wear area unit crucial problems. this text briefs (a) the importance of compound mechanical…
drastic difference between the theoretically derived expectations regarding the mechanical properties of polymer Nano composites and the experimentally obtained results. It is assumed that the most probable reason…
chemical sol-gel process. The dc volt-ampere characteristics of the developed ZnO Nano composites which were prepared under different conditions were measured. XRD and optical absorption of the material…
properties including tensile, bending and impact properties between different glass fiber architecture reinforced polyester composites which are fabricated by a hand lay-up technique. The effects of stacking sequences…
addition of 1 wt.% of titanium dioxide (TiO2) to the immiscible PLA/PCL composite and the modification of the interface area between them resulted in the formation of a binding ... Besides the mechanical properties, the…
Pineapple fiber reinforced polyvinyl chloride (PVC) composites (25-75% fiber by weight) were fabricated using compression molding technique and the mechanical properties such as tensile strength (TS), tensile modulus…
offer a strong potential for complex shape preforms, which could be used to manufacture composites with reduced waste and shorter production times. This article focuses on the improved strength ... offer a strong…
Silver Coated nanocenosphere (SCNC) in Poly Methyl Methacrylate (PMMA) and Acrylonitrile Butadiene Styrene (ABS) composites has been tried for its EMI shielding effectiveness. The strategy is to render the polymer…
comparative study of the different weave structures of jute woven fabric reinforced polypropylene (PP) composites. The weave structures were selected as plain (1/1), twill (2/1), twill ... basket (2/2). Composites (40%…
zirconium doped single crystal β-NiAl. With these non-destructive techniques residual stress, phase composition and thickness of the scales were determined at various temperatures. The results are compared with…
toxic. Pandanus tectorius leaves fiber is extracted and investigated as reinforcement in polymer composite for engineering applications. The habitant are easily found and grown along mangroves and in local jungles…
avoid the corrosion formation in the Cu-Al joint due to the heterogeneous chemical composition and structure. Factors influencing the corrosion resistance of Cu-Al joints could be divided into ... three categories, the…
microscopic observations. These materials are designed to have gradual or abrupt Microstructural or compositional variations within the body in one piece of material, these samples have been produced by powder…
which resulted in 109 MPa compressive strength for basalt, sand and chalk composition. In addition influence of Dimethyl aniline (DMA) amount and moulding temperature on mixing process and the strength
Functionally graded material (FGM) is new generations of composite materials where the properties are changed linearly according to the change in composition. This work presents the design, fabrication and…
smelting were chosen. It was noted that a uniform structure was obtained for all compositions, before and after homogenizing annealing. The ingots have a dendritic structure. Niobium and zirconium were…
silver mixed with textile fibers are the broadly examined materials for electromagnetic shielding. Composite yarns containing metallic wires and textile fibers delivered by friction spinning, core spinning or twisting…
Poly(vinylidene fluoride) (PVDF) composites have recently emerged as excellent candidates to fabricate flexible and small piezoelectric generators for portable devices. Among various techniques used to nanostructure…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.