Article · 19 Feb 2026
Research articlePublished 2018
Characterization and Analysis of Extraction Process-parameter of Pandanus tectorius (Screw-pine) Natural Fiber for Polymer Composites
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Natural cellulose fiber extract from Pandanus tectorius (Screw pine) leaves is comprehensively investigated as viable alternative for synthetic based fibers made from petro-chemical which is non-degradable and toxic. Pandanus tectorius leaves fiber is extracted and investigated as reinforcement in polymer composite for engineering applications. The habitant are easily found and grown along mangroves and in local jungles located at shallow water. The plant can grow up to 14 meters tall. In order to use these continuous cellulose fibers as reinforcement in polymer composites, the microstructural analysis and yield content analysis were carried out using SEM micrographs to establish the certainty of using them as reinforcement fiber. The alkaline, bleaching and combined alkaline-bleach treatment is utilized in extraction of the cellulose fiber to evaluate the effect on the mechanical property. The cellulose percentage of the fiber was increased as the concentration and soaking time were increased. The extraction process resulted in 73% cellulose percentage for 10 wt.% NaOH and 120 minutes treatment. Hence, it caused 87% increment in cellulose percentage compared to the untreated leaf.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Afolabi Lukmon Owolabi”
- BylineArticles whose byline prints “Puteri Sri Melor Megat-Yusoff”
