Acid Modified Jourdiqua Clay for Methanolysis of Castor Oil
castor oil with methanol were done under the reaction condition of 9% w/w catalyst loading, methanol to oil molar ratio of 18:1, 3 h reaction time
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
castor oil with methanol were done under the reaction condition of 9% w/w catalyst loading, methanol to oil molar ratio of 18:1, 3 h reaction time
methyl orange. The obtained results reveal that the photo catalyst performance depends to photo catalyst loading and TiO2/(HPA/HY) ratio. The photocatalytic activity of molybdophosphoric acid encapsulated into zeolite
framework were found to be, 65Ã?ºC reaction temperature, 2 h reaction time, 2.5% catalyst loading and 1:8 Helianthus annuus L oil to methanol molar ratio, obtaining maximal biodiesel
research study revealed that the key process variable for the basecatalyzed process was the catalyst loading and the optimum conditions for better yield were found to be at 25Ã
textile dyes and textile industry effluents in aqueous solutions under UV and sunlight. Optimal catalyst loading, dye concentration, effect of temperature, pH and degradation by re-used samples were studied
textile dyes and textile industry effluents in aqueous solutions under UV and sunlight. Optimal catalyst loading, dye concentration, effect of temperature, pH and degradation by re-used samples were studied
degrade different types of organic pollutants (e.g., dyes, pharmaceuticals, pesticides). Even at a low catalyst loading of 0.12 g L-1, the removal rate of organic pollutants
degrade different types of organic pollutants (e.g., dyes, pharmaceuticals, pesticides). Even at a low catalyst loading of 0.12 g L-1, the removal rate of organic pollutants
catalyst carriers is very promising due to their large surface to volume ratio, high catalyst loading capacity, outstanding stability and environmentally–friendly materials. In recent years, contamination of water
influence of the operating variables (stirring rate, temperature, initial molar ratio of reactants and catalyst load) on the performance of the process will be assessed. The kinetics of these reactions
spectroscopic technique. The effects of key operation parameters such as initial dye concentration, catalyst loading, as well as light intensity on the decolorization extents were studied. The decolorization
photo catalytic degradation of the dye were investigated. The optimum catalyst loading was found to be 2.0 g L- 1. It was noticed that the degradation
under both sunlight and UV light. The effect of various parameters such as catalyst loading, intensity of illumination was investigated on photocatalytic degradation of textile effluent. The degradation efficiency
much as 69.7% conversion could be achieved. Results showed that with increasing temperature, catalyst load and mole ratio of H2O2 in the feed, the oxidative conversion could be further improved
bench solvents and atmospheric pressure are used, and environmentally benign due to the low catalyst loading, renewable solvent and high atom efficiency. In this presentation the author will discuss this
process using zinc oxide nanoparticles the parameters such as effect of UV light, pH, catalyst loading and oxidants. The results of the present study demonstrated that CPC is readily
favorable by the Langmuir approach. The effects of various parameters such as catalyst loading, initial pH, substrate concentration and electron acceptors such as H2O2, KBrO3 on the decolorization have been
with excellent yields (85-99%) using Cs2CO3 as the catalyst. Mild reaction condition, low catalyst loading and short reaction time make this protocol much practical
stirred slurry reactor under isothermal condition. The effect of various parameters such as catalyst loading, agitation speed, initial concentration of reactant, partial pressure of hydrogen, effect of product have been
degradation of dye depends on several parameters such as initial concentration of the dye, catalyst loading, pH, electron acceptors and light intensity. COD removal was measured at regular intervals
effect of H 2 O 2 and K 2 S 2 O 8 , catalyst loading, dye concentration, effect of pH, effect of FeCl 3 , effect of temperature, light intens
TiO2 sonophotocatalysis led to complete (acrylic acid-co-acryl amide) hydrogels degradation with increasing catalyst loading, while, the presence of TiO2 in the dark generally had little effect on degradation
electron microscopy (SEM). The effect of various parameters, such as effect of pH and catalyst loading on Coralene Dark Red 2B azo dye degradation was investigated. The degradation efficiency
catalysts Mn(II) and Ni(II) which grafted on mesoporous silica has been tested in the transesterfication of vegetable oil. Mesoporous silica was modified with bor trifluoride to obtain stronger ... amount of metal that…
catalyst samples, with increasing nickel loadings of 4 to 29 wt%, were prepared by impregnation of different nickel precursors on SBA-15 mesoporous silica support. A modified sol-gel method ... loadings were obtained…
For authors and organisers
Find the right journal for your paper and submit your manuscript.