were studied by X-ray diffraction (XRD) technique and transmission electron microscopy (TEM). Then, the milled powders were cold pressed and sintered at different temperatures for 1 h in argon
Powder metallurgy techniques have emerged as promising routes for the fabrication of carbon nanotube (CNT) reinforced metal matrix composites. In this present work has been made to investigate the mechanical…
precipitation route. After preparing, the samples sintered at temperature 900⁰C for 6 hours. Different characterization techniques like XRD (X-Ray-Diffraction), FTIR (Fourier-Transform-Infrared-spectroscopy
components with micro geometric patterns. As an additive manufacturing technique, two dimensional cross sections were created through dewaxing and sintering by UV laser drawing on spread resin paste including ceramic
metal powder injection molding (MIM) technique has five main steps: selection of powder and binder, production of feedstock, injection molding, debinding and sintering. The material selected was the 316L steel ... high…
diffraction technique, and it confirms single phase orthorhombic structure. A systematic investigation of temperature and field dependent magnetic measurements was performed on 9000C sintered pellets in the temperature…
particulate filters, high temperature membrane reactors, thermal insulating materials, etc. It is difficult to sinter SiC ceramics at moderate temperatures due to the strong covalent nature ... technique and…
prepared. First individual ferrite powder prepared using coprecipitation technique. The prepared precursors were pre-heated at 500Ã?ºC followed by final sintering at 1000Ã?ºC for 4 hrs. The prepared ... composites of…
increased with the temperature. The superhydrophilicity of the sintered oxides was investigated by wetting experiments, by the sessile drop technique, were carried out at room temperature in air to determine
increased with the temperature. The superhydrophilicity of the sintered oxides was investigated by wetting experiments, by the sessile drop technique, were carried out at room temperature in air to determine
size between 18-40 nm. The superhydrophilicity of the sintered oxides was investigated by wetting experiments, by the sessile drop technique, were carried out at room temperature
good agreement with TEM . The superhydrophilicity of the sintered oxides was investigated by wetting experiments, by the sessile drop technique, were carried out at room temperature in air to determine
range 34 nm. The superhydrophilicity of the sintered oxides was investigated by wetting experiments, by the sessile drop technique, were carried out at room temperature in air to determine
nanoparticles synthesized using sol-gel auto-combustion method. Characterization of sintered ma-terials were performed by X-ray diffraction technique and Fourier transform infrared (FTIR). The XRD analysis shows that
experimental samples. The cutting was made by CADlCAM technique. The sectioned samples were polished by using diamond paste, then sintered to get discs of (10.2) mm of diameter and thickness
microfluidic molds by 3D printing. We evaluated four common techniques of 3D printing-fused deposition modelling (FDM), selective laser sintering (SLS), stereolithography (SL) and photo-polymer inkjet printing
Preceramic polymers can be processed using conventional polymer processing techniques into coatings, films, fibers and composites followed by pyrolysis and sintering to get ceramic coatings, ceramic films, ceramic fibers
Preceramic polymers can be processed using conventional polymer processing techniques into coatings, films, fibres and composites followed by pyrolysis and sintering to get ceramic coatings, ceramic films, ceramic fibres
different methods are approximately same. The superhydrophilicity of the sintered oxides was investigated by wetting experiments, by the sessile drop technique were carried out at room temperature
Direct Metal Laser Sintering (DMLS) and Selective Laser Melting (SLM) are Additive Manufacturing (AM) techniques that produce complex three-dimensional parts by adding layer up on layer of powder materials
burnable plastic sphere technique (BURPS). The volume fraction of poly methyl methacrylate microsphere (PMMA) was changed from 10 vol% to 50 vol% for higher porosity. As sintering temperature increased from
route and illustrated a pure anatase phase in case of solvothermal technique. The results of XRD were further confirmed by Raman spectroscopy, TEM, and FESEM. The crystallite size was almost ... visible corroborates the…
treatments is sensitive to the amount of oxidation which drops the magnetic properties of sintered NdFeB magnets. The additional oxygen mainly occurs at the finest particles of grain boundary phase ... sieving or…
Direct metal laser sintering (DMLS) and selective laser melting (SLM) are an additive manufacturing (AM) technique that produces complex three-dimensional parts by adding layer upon layer of powder materials