Article · 19 Feb 2026
Conference abstractPublished 25 Jul 2016
Effect of sintering temperature on the microstructure and electrical properties of porous BS-0.64PT piezoceramics
XiâÂ?Â?an Jiaotong University, China
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Porous BiScO3-0.64PbTiO3 (BS-0.64PT) ceramics were fabricated by using burnable plastic sphere technique (BURPS). The volume fraction of poly methyl methacrylate microsphere (PMMA) was changed from 10 vol% to 50 vol% for higher porosity. As sintering temperature increased from 1000Ã?°C to 1150Ã?°C, average grain size of porous BS-0.64PT ceramics with different volume fraction of PMMA increased evidently from 1.02 Ã?¼m to 9.0 Ã?¼m, while pore shape was nearly sphere with no obvious difference in pore size. Relative permittivity (Ã?r) increased slightly with increasing sintering temperature. Piezoelectric coefficient (d33) of porous ceramics with 10~30 vol%PMMA sintered at 1100Ã?°C was about 430 pC/N, which was higher than that of sintered at 1000Ã?°C, 1050Ã?°C, 1150Ã?°C. When the PMMA content was 40~50 vol%, d33 decreased gradually with increasing sintering temperature. Electromechanical coupling coefficients (Ã?ºp, Ã?ºt), mechanical quality factor (Qm), piezoelectric coefficient (d31), hydrostatic voltage coefficient (gh), hydrostatic figure of merit (HFOM) were derived from impedance spectrum. The result demonstrated that the value of gh and HFOM for porous BS-0.64PT ceramics sintered at 1000Ã?°C and 1100Ã?°C were higher than that sintered at 1050Ã?°C and 1150Ã?°C. The highest gh and HFOM were 0.025 V/mâÂ?¢Pa and 5867Ã?Â?10-15/Pa respectively, with 30 vol% PMMA and porosity of 21.6% sintered at 1100 Ã?°C.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Jinting Tan”
- BylineArticles whose byline prints “Zhenrong Li”
