seed shell Ash were evaluated by different techniques such as X-ray flourences, X-ray diffraction and thermgravimetric analysis. The analysis was done inorder to determine its suitability as organic ... economic means…
alloy, average content of manganese was 93%, copper 7%. X-ray diffraction pattern of the alloy shows the BCT (body centered tetragonal) Ã?³-Mn solid solution phase with copper
coated modified SPIONs. The structure and composition of synthesized nanoparticles were examined by x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM)…
selectedâÂ?area electron diffraction (SAED) measurements. Elemental composition and oxidation state of palladium in Rb2PdF6 were examined using x-ray photoelectron spectroscopy (XPS) analysis. Ligand to metal charge…
effect was done in detail. The CdTe NPs were analyzed using X-ray diffraction (XRD), ultraviolet-vis and photoluminescence (PL) spectroscopy. Structural parameters estimated by XRD revealed cubic phase
metal in a molten alkali/ alkaline-earth metal/polysulfide/polyselenide/flux. Single crystal x-ray diffraction measurements performed on several crystals showed a high quality of the crystals, proven
using Freeze-dry technique. Based on the results of differential scanning calorimetry and X-ray diffraction studies, Curcumin was presented in its amorphous state in formulations containing Neusilin US2. Formulation
microscopy (SEM) equipped with energy dispersive X-ray (EDX) spectroscopy, Vickers microhardness, and X-ray diffraction (XRD) techniques. Finally, the corrosion behavior of coatings in 3.5 wt.% NaCl solution were
Nano composite of hopcalite/hausmannite was prepared by ceramic method. X-ray diffraction (XRD) technique was used to identify on crystalline phases. The solid state reaction between CuO and Mn2O3
method of physical low temperature adsorption-desorption of nitrogen and powder X-ray diffraction is carried out. Magnetic characteristics of magnetic nanocomposites were compared by constructing of magnetization curves
Infrared spectrometer (FTIR) and Nuclear Magnetic Resonance (1H NMR). ADX was characterized using X-ray Diffraction analysis (XRD), Scanning Electron Microscopy (SEM), particle size distribution (PSD), zeta potential…
oxygen partial pressure. The stress measurement results are consistent and agreement with X-ray Diffraction results. The in-plane residual stress strongly depends on processing parameters and nearly stress free
achieve the perovskite. The structure of synthesized ceramics is then studied using X-ray diffraction (Philips PW-1730) and scanning electron microscopy (TESCAN-MIRA3) Results and Discussion: SrCo0.8Fe0.2O3
calcination temperature of 1000°C. The structure of synthesized ceramics is studied using X-ray diffraction (Philips PW-1730). Results and discussion BSCF has the advantage of high ionic conductivity ... developed…
observed through scanning electron microscopy (SEM), transmission electron microscopy (TEM) and wide-angle X-ray diffraction (WAXD), respectively. The molecular level interactions of CNC’s and MMT’s with keratin
doping concentrations. Structural and morphological properties of the films have been investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. Thin films have been optically pumped
energy dispersive X-ray spectroscopy. In the case of thin film, grazing incidence X-ray diffraction, transmission electron microscopy, electrical resistivity and nano-indentation were used for characterization. An…
CsCl type order) along the Fe3Al-Fe3Si section by means of high temperature X-ray diffraction and recording the disappearance of D03 superlattice (111) and (200) reflections as a function ... phase purities of the…
catalyst was characterized using Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), thermogravimetric analysis (TGA/DTA) and X-ray fluorescence (XRF). The GC-MS result
structure, morphology, vibrational and optical studies by using X-ray photo electron spectroscopy, X-ray Diffraction, Atomic force microscopy, InfraRed Spectroscopy , Raman Spectroscopy and UV-VIS Spectroscopy
analytical, spectral (UV-visible, IR and NMR) and thermal techniques. Infrared, NMR and X-ray powder diffraction patterns reveal the formation and isomorphic nature of [M(OOCCH=NNHC6H5
achieve sufficient conductivity. The synthesized nanocatlysts were characterized by X-ray Diffraction (XRD), High Resolution Transmission Electron Microscopy (HRTEM), Electron Energy Loss Spectroscopy (EELS), X-Ray…
TiO2/ND). The morphology, structure, and composition of the composites were characterized with X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction…
ultrasonically atomized nanocrystalline ZnO powders was studied. The powders were characterized using X-ray diffraction, transmission electron microscopy, selective area electron diffraction, absorption spectroscopy and…
microstructure and transport critical current density (Jc) of the tapes were conducted using X-ray diffraction, scanning electron microscopy and four point-probe respectively. The enhancement of critical current density
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.