Conference abstractPublished 17 May 2018
Electrodeposition of Mn-Zn and Mn-Cu alloys from sulfate solution containing complexing additives
I Javakhishvili Tbilisi State University, Georgia
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Due to high negative standard potential and availability, galvanic coatings of manganese and its alloys as protective materials can be promising for industrial exploitation. To decrease chemical reactivity of manganese, it is doped with metals having higher standard potentials such as copper, zinc, cobalt, nickel iron and others. We obtained mirror-like coatings based on a nanocrystalline, globular-shaped Mn-Zn alloy with a high Mn content (97-98%) from a sulfate-ethylenediaminetetraacetic acid disodium salt bath in the presence of sodium selenate (NS) as an additive. The conditions included: 5 gâÂ?Â?l-1 ZnSO4âÂ?Â?7H2O, 10 gâÂ?Â?l-1 EDTA, 58 gâÂ?Â?l-1 MnSO4, 68 gâÂ?Â?l-1 (NH4)2SO4, 0.33 gâÂ?Â?l-1 NS, pH 3-5.5; t=30; current density 0.1-0.175 mA/cm2; plating time ÏÂ?=15min; coating composition: 97.5-98.5% Mn, 2.5-1.5% Zn; and current efficiency 45.2-51.7%. The nanocrystalline electrodeposited Mn-Zn alloy coating, featured broad and poorly defined diffractograms, x-ray diffractograms, which corresponded to a cubic Ã?±-Mn crystal structure. The sodium selenate additive, concentrations and nature of components in solution affected the production of a mirror like coating of the Mn-Zn alloy. The high content of manganese in the coating provides a high negative corrosion potential for the steel substrate therefore providing anodic protection of the steel. Silvery, fine crystalline, solid and nonporous coatings of Mn-Cu alloy are obtained only at high cathodic current densities (ikâÂ?¥37.5 AâÂ?Â?dm-2) and within pH 6.5-7.5. Current efficiency of silvery Mn-Cu alloy coating from the electrolyte containing both, complex agent citrate and EDTA in equivalent quantities, was 42% (ik=37.5 AâÂ?Â?dm-2, pH 6.5, t=30). In the alloy, average content of manganese was 93%, copper 7%. X-ray diffraction pattern of the alloy shows the BCT (body centered tetragonal) Ã?³-Mn solid solution phase with copper.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “David G Gogoli”
- BylineArticles whose byline prints “Gigla S Tsurtsumia”
