next full transformation. The disappearance of two-step transformation highlighted the occurrence of microstructural rearrangement driven by the internal stress field in the successive training cycles. A strain…
compressive strength and carbonation will be conducted to establish the effect of nanosilicon. Furthermore, microstructure would be conducted to maximize the reliability of the results. In conclusion, nanosilicon
imperative to analyze the effect of composition on the transformation temperatures and investigate the microstructures of various alloys. In this study, effect of alloy composition and heat treatment ... microstructure…
characterisation. In present study the transmission x-ray microscope (TXM) method was validated in microstructural study of mudstone shale sample. High structural complexity was observed. Initial structure displays…
produced by two-roll casting with electric current pulse and magnetic fields, and the microstructures were observed. The experimental results show that application of composite fields (ECP and EM field ... during TRC…
substrate with pores around 300-500 nm throughout and with cellular like microstructure on the surface of e-glass which was again very suitable for tissue in-growth and bonebonding
plays a potential role in preventing bone tissue deterioration by restoring its composition and microstructure in the post-menopausal condition, thereby, maintaining the mechanical strength of the bone. Conclusion: These
relatively new technology in pulmonary medicine. Real time, in vivo visualization of elastin microstructure in the airway wall as well as alveoli is possible via flexible bronchoscopy under moderate sedation
powders were formed and fired at 1310 ± 20°C for 2 hr. Phase composition, microstructure, physical and mechanical properties of these composites were determined. The in-vitro bioactivities of these
Brake linings have complex microstructure and consists of different components. The purpose of this research is to optimize the use of brake liner frictional materials with new formulation incorporating micaceous
ability of a new fabrication technique to develop rapidly new coating composition and microstructure. The compact powder were prepared by powder metallurgy method involving powder mixing and the bond coat
thermal gradients in the weld pool during welding. The effect of current pulsing on microstructure and hot tensile properties of filler added gas tungsten arc welding (GTAW) of super 304H
used in the analysis of nanogels, scanning electron microscopy (SEM) to envision the surface microstructures was also performed. It was found that average particle size was in the range
little their hardness. The obtained results show that this heat-treatment induced only little microstructure evolution but which was sufficient to lose up to 30 Vickers points, which may improve
proposed electrode was studied by means of cyclic and square wave voltammetry. The microstructure and morphology of the modified electrode were studied by SEM and EDX techniques. It has been
25wt.%Cr)TaC-reinforced cobalt-based superalloywas elaborated after preliminary thermodynamic calculations. The obtained microstructure, particularly rich in script-like shaped eutectic TaCmixed with the periphery part
temperature history as some physical and mechanical ones. In this work the evolutions of microstructure, volume mass, compression properties and hardness resulting fromdifferent heat-treatment and cooling conditions…
cast, then exposed at 1200°C for 50 hours. Their as-cast and aged microstructures were characterized by X-ray diffraction, electronic microscopy and image analysis. Calculationswere carried out with ... Thermo- Calc…
typically, pouring temperature (T), cooling slope length (L) and tilt angle (è), on the microstructure of A356 cast aluminum alloyswas studied. The analysis of variance (ANOVA) statistical technique wascarried…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.