attempting to create a biomimetic microenvironment for studying mutual interactions. To create the microstructured 3D niche, we have used type-I collagen scaffolds. Since collagen scaffolds can exhibit poor mechanical
hydraulic press at a forging speed of 33.3 mm/s. The grain structure and microstructure of the forged alloy were investigated using an optical microscope. The hardness measurements were taken ... favours the…
modified A356. The improvement in wear resistance may be attributed to the refined microstructure, grain refinement and modification and improved hardness due to heat treatment
that include microfluidics, 3D scaffolds and single cell encapsulation [3] as new nano- and microstructured tools to investigate new 3D cell models which better mimic the physiological context
heat treatment. The improvement in wear resistance may be attributed to the change in microstructure due to Grain refinement and modification, uniform distribution of hard particles of Boron Carbide
this paper, we present the correlation between microstructure and dielectric properties of Ba(Zr0.4Ti0.6)O3 (BZT) thin films deposited by RF magnetron sputtering on MgO and LaAlO3 single crystal substrates
structural morphology and hardness of commercial silver- palladium dental alloy has been investigated. Matrix microstructure of silver- palladium such as crystallinty, crystal size and orientation changed after exposure…
mice survival rate (curative), and pancreatic antioxidant capacity, oxidative damage, beta-cell function and microstructural changes (tonic). Results show that P.berghei malarial parasite infection caused oxidative…
also observed that Pr-doping increases the symmetry and decreases the second phases noticeably. Microstructure investigation using the scanning electron microscope showed a reduction of grain size with doping
dentistry. The dental optical coherence tomography (OCT) system aims to produce images of dental microstructure In vivo, that help in assessing the qualitative and quantitative status of oral tissue health
liquid phase sintered tungsten heavy alloys. Quenching was used to observe the in situ microstructure at different temperatures and times. A 93 wt.% tungsten heavy alloy (WNi-Fe) was quenched
Tunnel and Flash defects are produced in weld zone. These problems and Weld quality, microstructure, mechanical characteristics of the weld zone can be controlled by varying the FSW parameters such
keeping all other parameters constant. The microstructure and mechanical properties of fabricated MMC’s were analysed. Microstructural studies of the MMC’s reveal a uniform distribution of zirconium dioxide (ZrO2
variety of tests were performed to assess the quality of the coating obtained: The microstructure characteristics of powder and coating were investigated using Scanning Electron microscopy (SEM) coupled with Energy
temperature inside the microwave oven itself. he samples showed appreciable improvement in hardness and microstructure study revealed that carbide phase distribution was fairly uniform with binder phase segregating…
thin films increase with the increase of doping concentrations. The structural details and microstructure were obtained from X-ray diffraction, the results shows the grain size decreased with the increase
safe end of nuclear pressure vessels are more susceptible to stress corrosion cracking (SCC). Microstructure and material property in the nickel-based alloy weld especially the high hardness zone
Mechanical properties. And the results are compared for choosing the best composite .A microstructure test was also conducted to determine the best results. Finally the composites are analyzed using Ansys
cobalt-based alloy Co-25Cr-0.25C was elaborated by casting. Its microstructure was composed of a dendritic matrix and of interdendritic chromium carbides. Three parallelepiped samples were tested
addition to reducing the effects of aggregation. A detailed investigation of morphological and microstructural characteristics was performed using XRD and SEM. The Raman spectroscopy showed peaks for magnetite (Fe3O4
inverse relationship to the Cobb angle. Conclusion: Patients with AIS present variations in the microstructure of both paraspinal and intercostals muscles, with similar changes. This suggests that the process
Methods: Calculations of solubilities rates accompanied with XRD analyses, plus accurate monitoring of metformin microstructural features as function of applied solvent of crystallization process. Results: XRD analyses…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.