respectively. The additional peak observed at lower angle at 6.9ᵒ in nanocomposite thin films are associated to CuPc. The field emission scanning electron microscopy (FESEM) observed that surface morphology
respectively. The additional peak observed at lower angle at 6.9ᵒ in nanocomposite thin films are associated to CuPc. The field emission scanning electron microscopy (FESEM) observed that surface morphology
angle class I relation. DC/TMD criteria was used to diagnose the patients, the occlusion time OT registered in the maximum intercuspation digitally by using T-Scan NOVUS device. Results
source: pulsed, 400-1400 nm, with ~1 nm resolution; a new galvanometric method of scanning, with synthesized pivot point, not requiring a custom coupling lens; spectral analysis of imaging data ... instrument achieves…
study 63 cases of primary open-angle glaucoma and 57 healthy controls were included. Spectralis OCT2 was used to capture macular volumetric scans at the 6 mm ETDRS circle
were dried at ambient pressure method. Scanning electron microscopy (SEM), DSC, TGA were used for the characterization of the composites. The contact angle and heat conducting performance of the composites
PHEMA) were evaluated using scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analyser (TGA) and water contact angle analyser, respectively. An average fiber…
hour glass pattern and optimum bond angle resulted in superior bond strength & formability. Microstructural characterization was done using light optical microscopy and scanning electron microscopy. Residual stress is…
hour glass pattern and optimum bond angle resulted in superior bond strength & formability. Microstructural characterization was done using light optical microscopy and scanning electron microscopy. Residual stress is…
index, Hausner’s ratio, Kawatika factors, angle of repose etc. are found to be within the desired range. Moreover FTIR spectroscopy, Differential Scanning Calorimetric study has shown that there
resin was reflected by contact angles and the disperse state of the modified NCC particles in UF resin was indicated by scanning electron microscope (SEM). Bending and bonding strengths
method works more like a line scan camera in principle. The point of intersection of the camera and light source make the angle of triangulation which varies with depth
calculated with the phantom CT scan and delivered to the phantom with the original and 0 degrees gantry, collimator and table angles. Thus IMRT quality control (QC) plans were generated
scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). Flow properties of SGS and SMS were assessed by measuring the parameters of angle of repose (AR), CarrâÂ?Â?s index
steel in seawater. The surface structure and composition were then characterized by means of Scanning Electron Microscopy (SEM) and Atomic Force Microscope (AFM) techniques. The electrochemical studies showed that…
Force Microscopy (AFM) and scanning electron microscopy, it is possible to evaluate the near-surface dispersion of GO in polymer/GO nanocomposites (SEM) Wide-Angle X-Ray Scattering (WAXD
side=scan sonar is important, not only for ocean topography, but it also provides accurate and up-to-date bottom slope corrections needed to convert the backscattered arrival angles ... seafloor echoes received by the…
magnification of 1.2 M) and Scanning Electron Microscopy (SEM, Zeiss EVO 50 SEM). Wettability of the surface was calculated by the contact angle method. The measurement was performed by establishing
years. Saggital scans of T2 sequence of MRI performed before and 6 months after the surgery were compared. Intervertebral angle of operated segment, total lumbar lordosis and 1/3 posterior
question. By very rapidly scanning and developing a 3D image of the same area of the retina many times, but from slightly different angles, the device is able to compensate ... Handheld ultrahigh speed swept source…
second step is functionalization of the etched surface by CF4 plasma surface treatment. The Scanning Electron Microscope image shows how the different types of etching can affect the surface roughness ... light…
maxillary model to set a part coordinate system. The master model was digitally scanned with intraoral (Group IO) and laboratory (Group LAB) scanners to obtain 10 full arch digital models ... angles between Groups IO…
prospective cross-sectional study of 150 apparently normal adult patients who underwent both CT scan and ultrasonography (US) at Clinix Healthcare Ilupeju, Lagos State, and who met the inclusion criteria ... posterior…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.