between 5 and 55±C. Micro shear bond strength test was performed using universal testing machine until bonding failure. Failure modes and fracture surface topography will be evaluated with scanning
Testing of bond strength: (Using a universal testing machine) to investigate the effect of metal surface treatment (sandblasting, grinding and grinding followed by sandblasting) before repocelainization of the bare metal
combined amalgam-composite. After thermo cycling, fracture resistance was measured using an Instron universal testing machine. Data were analyzed statistically using one-way ANOVA and Tukey tests
restoration bonded to dentinal surface. Shear bond strength (Mpa) was measured using a universal testing machine at a 0.5 mm/min crosshead speed. To measure the contact angle, specimens were
samples in each sub-group were used to measure shear bond strength using Universal Testing Machine, and 1 sample was examined with Scanning Electron Microscope (SEM). Data were analyzed using
composite was bonded to each capping material. Bond strength was tested in a universal testing machine, and data were analyzed using 2-way ANOVA and Duncanâ??s multiple range test
were used for buildup on the enamel surfaces. After cutting the samples the universal test machine was used to measure the microtensile bond strength. Data were analyzed using
days at 37°C; control group were then measured by a universal testing machine and the surface morphology of each experimental group was analyzed by scanning electron microscope. Biodentine
applied to the primary molars, and bond strength was evaluated using a universal test machine. Primary enamel on the fissures showed a statistically significant difference in mean surface roughness among
55oC for 1000 cycles. The teeth in all groups were deboned using a universal testing machine. Studentâ??s t- test was used to compare the shear bond strength between
investigated. The mechanical and morphological properties of composites were characterized by tensile tests (universal testing machine) and Scanning electron microscopy (SEM). SEM images reveal the homogeneous…
Thermo gravimetric analysis and C-Therm TCi. Mechanical properties were examined by Universal Testing Machine (UTM). These results indicated that PPS/GF/RGO composites were enhanced thermal properties and mechanical
measurements, tensile strength at maximum and the tensile strain at break by electromechanical universal testing machine, and ionic conductivity by potentiostat. Results indicated on relative hydrophobic membranes with…
shape extrusion channel maintaining a constant die temperature and constant reduction ratio. Universal testing machine (UTM) is used to extrude the polymer and joint strength of extruded samples are characterised
were determined using a burning test and mechanical properties were determined using a universal testing machine. Results showed that biochars, owing to their morphological structure, were found to have dispersed
normal saline and incubated at 37°C for ninety minutes. A Wp 300 universal material testing machine was modified and used to perform a three-point bending test
samples were normalized. All experimental samples were tested in a computer controlled Testometric universal materials testing machine and Rockwell hardness tester and later viewed in an optical microscope. The results
flaps from the cornea were stretched until they were completely ruptured using a universal tensile testing machine. Biomechanical properties were assessed by the force at rupture and the Young
flaps from the cornea were stretched until they were completely ruptured using a universal tensile testing machine. Biomechanical properties were assessed by the force at rupture and the Young
during the growing children. Material / Methods: I)Physical testing: Prostheses were submitted to universal testing in machine EMIC and a computer with Tesc software, able to generate graphs of force
during the growing children. Materials & Methods: I-Physical testing. Prostheses were submitted to universal testing in machine EMIC and a computer with Tesc software, able to generate graphs of force
both sides. The welded samples were characterized by using metallurgical microscopy and universal tensile testing machine. The changes in microstructures, micro hardness and tensile properties were discussed
quenched in oil. The mechanical behavior of the samples was investigated using universal tensile testing machine for tensile test and Rockwell hardness method for hardness testing. The hardness values
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.