characterized using FTIR, SEM, TEM, XRD, EDAX and BET. The effect of parameters like adsorbent dosage, contact time, pH, adsorption capacity and desorption have been studied. The adsorption studies indicate
study by carbonization and dehydration (biosorption) methods and the effect of pH, contact time, adsorbent dosage, and adsorbent particle size in removal of pollutants present in diary wastewater was evaluated…
from aqueous solutions are dependent on contact time, pH, adsorbent dosage, and initial concentration of metal ion (adsorbate). Maximum adsorption of Cd (II) and Sn (II) occurred
batch adsorption technique. Adsorption studies were carried out for various parameters such as adsorbent dosage, ionic strength and contact time. Adsorption of MNZ onto MWCNTs increased with the increase ... adsorbent…
activated carbon in aqueous phase. The influence of initial acid concentration, contact time, adsorbent dosage and temperature has been studied. The Langmuir and Freundlich model gives a good representation ... showed…
employed for the preparation of activated carbon. The effect of various factors namely pH, adsorbent dosage, and adsorbent particle size was studied to identify the adsorption capacity of palmyra palm ... percentage of…
temperature under the batch mode. The effect of various parameters such as agitation time, adsorbent dosage and initial concentration on the extent of removal of lead has been determined ... contact. The maximum removal…
solution using activated carbon. Effects of different parameters such as agitation time, adsorbent size, adsorbent dosage, initial concentration of manganese in aqueous solution, volume, pH of aqueous solution on…
ground Moringa oleifera pods was studied under various conditions such as, pH, contact time, adsorbent dosage, and concentration of adsorbate. The adsorption process was checked for conformity with the Freundlich…
groups. To evaluate the effectiveness of the bleaching process, operating temperature, contact time, and adsorbent dosage were varied. As the temperature and adsorbent dosage increased, the bleaching efficiency…
Adsorption was carried out under the control of three different factors namely contact time, adsorbent dosage and pH. Optimum time, pH and adsorbent dosage for adsorption process were found
maximum at 86.1% for Al2O3+SDS but decrease with increase in the adsorbent dosage for Al2O3 with %R maximum of 78% at the least (0.02 g) dosage. On the other ... hand, at constant adsorbent dosage, %R of 94 and 93% for…
from aqueous solutions. The adsorption capacity was determined as a function of contact time, adsorbent dosage, initial metal ion concentration, pH and temperature. The optimum contact time, adsorbent dosage
carcinogenic compound from textile industry. The effects of Contact time, Initial dye concentration and Adsorbent dosage are studied in batch mode. At different adsorbent dosages(0.5g/100ml
reduced cryogels were characterized by FT-IR and SEM and then used as adsorbents for removal of Cu(II) ions from aqueous solution. Preliminary adsorption test revealed that reduced cryogels ... with increasing the…
studied in batch mode the effect of agitation time and initial dye concentration, adsorbent dosage and pH were examined. The study revealed that the amount of dye adsorbed ... reached equilibrium after 35 minute. for…
removal is critically necessary to prevent water pollution. At various initial hexavalent chromium concentrations, adsorbent dosages, pHs, and contact periods, the removal of hexavalent chromium from aqueous solutions…
various process parameters such as temperature, pH of solution, initial dye concentration and adsorbent dosage on dye removal was studied by using experimental runs designed by Central Composite Design ... 450C, pH…
equilibrium data was fitted with Langmuir and Freundlich models. Several operation variables such as adsorbent dosage, contact time, initial pH, and temperature on the removal of dyes were investigated ... removal…
equilibrium data was fitted with Langmuir and Freundlich models. Several operation variables such as adsorbent dosage, contact time, initial pH, and temperature on the removal of dyes were investigated ... removal…
with respect to variations in different parameters like contact time, pH, initial adsorbate concentration, adsorbent dosage and temperature by one variable at a time method. Adsorption equilibrium was found ... observed…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.