main objective of this study was to numerically investigate the behaviour of square aluminium- polyurea composite plate systems supported by a bolted frame subjected to low velocity impact ... diameter rigid bar at the…
assess the antimicrobial properties of copper coatings deposited on a double zincated aluminium plate by electrochemical method and compare the same with that of a surface of the bulk copper
present study, ultrafine grained plates made of commercially pure aluminium were obtained in the hybrid process. Initially bar-shaped samples with dimensions of 26 x 26 x 130 mm were
reinforced with silicon carbide long fibres. The numerical models presented are for an aluminium plate with internal layers of silicon fibre that have been arranged ... creep and thermal loading. To test the numerical…
selected for creating the mobile medical construction. Due to the specific shape of cabin, aluminium plates had to be bent in different angles. Moreover, the opportunity of cabin installation ... mounting holes (cut by…
using Electrochemical Impedance Spectroscopy and morphology test to determine the corrosion rate of the Aluminium plate and effect of voltage levels. After 40 days, the final weights of all samples ... electric voltage…
exposure at Tithal (South Gujarat) representing a marine environment. Mild steel (MS), zinc and aluminium plates exposed during November-2005 indicates corrosion rate of 122, 55 and 2.1 mg/sq.dm ... resistivity towards…
thin layer chromatography for the estimation of deferasirox. The chromatographic development was performed on aluminium plates coated with silica gel 60 F254 using chloroform:methanol:triethylamine
Method II: Densitometric separation of the drugs was performed on aluminium plates precoated with silica gel 60 F254 plates, with mobile phase chloroform, acetonitrile and methanol (volume
analysis of Gallic acid in health drink was developed. Precoated silica health drink aluminium plate 60F-254 (20 × 10 cm) with 200 µm thickness was used as stationary phase while
analysis of Gallic acid from health drink was developed and validated. Pre-coated silica aluminium plate 60F-254 (20 × 10 cm) with 200 μm thickness was used as stationary phase
Aceclofenac in pharmaceutical dosage form has been established and validated. The method employed TLC aluminium plates precoated with silica gel 60F254 as stationary phase and the solvent system consisted
furoate in topical cream. The separation was carried out on Merck precoated silica gel aluminium plate 60 F254 using Dichloroethane: Diethyl ether: Ammonia: Methanol: Ethyl acetate
simultaneous investigation of Irbesartan and Hydrochlorothiazide in tablet formulation. Chromatographic separation was performed on aluminium plates precoated with silica gel 60F254, with methanol: ethyl acetate
ethanol-ethyl acetatate (9:2, v/v), (RF 0.38) on precoated silica gel 60F254 aluminium plates and densitometric determination was carried out in reflection/absorption mode
combined tablet dosage forms is reported in this paper. The method uses aluminium plates coated with silica gel 60 F254 as stationary phase and n-butanol-water-methanol-ammonia
arjunolic acid in Tensowert tablet was performed using high-performance thin-layer chromatography. TLC aluminium plates precoated with silica gel 60F-254 (0.2 mm thickness were used. The sample were
Cetirizine hydrochloride and Phenylpropanolamine hydrochloride in tablet dosage form. The method employed TLC aluminium plates precoated with silica gel 60F254 as stationary phase. The solvent system consisted of ethyl…
determination of pimozide in bulk and pharmaceutical dosage form. The method employed aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of toluene
bulk drug and in formulation was developed and validated. The method employed HPTLC aluminium plates precoated with silica gel 60 F254 as the stationary phase. The solvent system consisted
somnifera Linn. extract present in Uni- Bone herbal formulation. HPTLC separation was performed on aluminium plates precoated with silica gel 60 F254 and toluene-methanol-acetic acid
layer chromatographic method. Chromatographic development of standard and samples were carried out on Merck aluminium plates precoated with silica gel 60 F254 as the stationary phase. Mobile phase used
validated as per the International Conference on Harmonisation guidelines. The method employed TLC aluminium plates precoated with silica gel 60F 254 as the stationary phase. The solvent system consisted
HPTLC) for estimation of eslicarbazepine acetate. The stationary phase used was precoated silica gel aluminium plates 60 F-254 with 250 μm thickness. The mobile phase used for separation
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.