silica (SiO2) substrates by RF magnetron sputtering at room temperature. As deposited samples were annealed at 400 °C, 500°C and 600 °C for 45 min in quartz annealing furnace ... crystalline hexagonal Wurtzite structure…
study the effect of intermediate spheroidal annealing on some properties of ametal, samples of chromium-nickel stealwere chosen. The sampleswere carburized, normalized, annealed, hardened and tempered. The microhardness…
transcription requires a specific cellular tRNALys3 to act as a primer. This tRNA is annealed during assembly of new HIV-1, i.e., the infecting virus already contains annealed tRNALys3 ... tRNALys3 anneal to a…
manuscript demonstrated an annealing technique to modulate the thermoelectric properties of GeSeIn thin films grown on Si substrate by thermal evaporation. The grown samples were annealed at various temperatures from…
conductivity, and absolute temperature, respectively. As a post- synthesis process to adjust thermoelectric properties, annealing has been widely used in thermoelectric research for the ZT enhancement of various…
meantime, in order to cope with the low-temperature process for Ge, microwave annealing was added to compare with rapid thermal annealing. In this paper, silicon germanium film covered with ... implantation is…
that doped by 1% NiO prepared by Chemical pyrolysis method. The prepared films are annealed at 450 °C and 500 °C and then it recorded the optical absorption spectra ... range of (300-900) nm. The absorbance and Urbach…
have to be met by all possible actions for RPV in-service embrittlement mitigation. Annealing treatment is known to be the effective measure to restore the RPV metal properties deteriorated ... neutron irradiation…
mechanisms of recrystallization and grain growth in a nanostructured austenitic stainless steel 316LVM annealed under high hydrostatic pressure. The nanostructures were obtained by profile rolling (PR) to a total strain…
glass substrate using Spray pyrolysis method. The properties of as-deposited ZnIn2S4 film and annealed films were characterized using the XRD, UV-Vis-NIR spectroscopy and Raman spectrum, FESEM, EDAX ... hexagonal…
method that used to prepare Cu:NiO thin films onto glass substrate with various annealing temperature. Spectral absorbance of prepared thin films determined by UV-Visible spectrophotometer in the range ... absorbance…
substrate at a room temperature (R.T) by the RF magnetron sputtering method, and then annealed at the temperature of 600℃ in the 98%N2+,2%H2 ambient gas a with ... rapid thermal annealing. Rapid thermal annealing…
produced fromhot rolled sheet by deep-drawing process at normal room temperature. Intermediate annealing is needed to ensure low work-hardening during drawing and to minimize the forming related problem ... cartridge…
through a technique of oxalate precursor. Effects of different Fe3+ /Ba2+ mole ratio and annealing temperature on the particle size, microstructure andmagnetic properties of the resulting bariumhexaferrite powders has…
fabrication limitations and errors. In this work the effect of the optimization of the annealing process was studied. Two scenarios were experimentally investigated in the first scenario the substrate temperature…
effect of annealing on the resistivity of copper (I) oxides (Cu2O) samples has been investigated in detail. The resistivity of the sample is a function of the power output ... such Cu 2O solar cell. Results revealed…
Laser annealing has attracted considerable attention due to its localized interaction with the treated sample and its possibility to achieve low manufacturing costs in materials processing. One of the most ... used…
prepared by rapid quenching method in an Argon (Ar) atmosphere. The alloy has been annealed in a controlled way in the temperature range ... minutes. Nanocrystalline state was evaluated by X-ray diffraction (XRD). In…
effect of annealing on the resistivity of copper (I) oxides (Cu2O) samples has been investigated in detail. The resistivity of the sample is a function of the power output ... such Cu 2O solar cell. Results revealed…
properties were studied on sintered Duplex Stainless Steels (DSS) with the influence of solution annealing treatment for obtaining equal α/γ phase proportions. The solution annealing treatment was performed ... obtained…
patterns of the films were investigated for asdeposited and annealing in (4bar). By XRD, the polycrystalline phase is identified for as-deposited films and it stay polycrystalline with ... preferentail crystallographic…
relatively simple and is easily controlled. A systematic investigation on the effect of annealing temperature on the structure of PAni.CSA/PEO nanofibers was studied. Morphology and diameters ... spun and annealing…
concept of simulated annealing algorithm is derived from the organic integration of optimization and thermal equilibrium in statistical mechanics. This algorithm simulates the process in thermal equilibrium of natural…
After an extensive review, we have performed a chronological analytical study of the simulated annealing based placement algorithm. We have explored the pros and cons of simulated annealing based placement…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.