nickel, titanium and other super alloys with intricate shapes and complex profiles. In WEDM, cutting speed (CS) is a key performance measure to achieve optimal utilization of process. However, input ... technique. This…
this paper, the effects of cutting tool coating material and cutting speed on cutting forces and surface roughness were investigated on a Taguchi experimental design by turning Hastelloy ... cutting forces were…
been shown that high speed laser sealing of polymer films to opaque polymer substrates is most effective when the laser wavelength is chosen so that the former is ostensibly transparent ... system. This work identifies…
Taguchi’s orthogonal array in which the four laser cutting parameters viz. laser power, cutting speed, assist gas pressure, and stand-off distance were arranged at three levels. The width ... laser cut or kerf, quality…
minimum Surface roughness. It considers the analysis of effect of the process parameters, cutting speed, feed rate and depth of cut on cutting forces during turning operation. Machining
tests were performed by the turning process using uncoated carbide tools at three different cutting speeds, feed rates and depth of cuts. Cutting force (Fz) and surface roughness (Ra) were ... experimental results…
milling of aerospace aluminum alloys used. The cutting temperature depends upon the cutting speeds, depth of cuts and feed rates. The cutting temperature increases with an increase in the depth ... cut and feed rate and…
heat exchangers. In this talk, the effects of cutting tool coating material and cutting speed on cutting forces and surface roughness were investigated on Taguchi experimental design. Main cutting force ... higher…
this study, were investigated the effects of cutting speed on cutting forces and surface roughness based on Taguchi experimental design. The effects of machining parameters were investigated using Taguchi ... with KYS25…
this study, were investigated the effects of cutting speed on cutting forces and surface roughness based on Taguchi experimental design. . The effects of machining parameters were investigated using Taguchi…
this study, were determined the effects of cutting tool coating material and cutting speed on cutting forces and surface roughness based on Taguchi experimental design. For this aim, Aeroscape material ... lathe. Metal…
surface finish, material removal rate (MRR) and power consumption for 3 input parameters, namely cutting speed, feed rate and depth of cut (2 and 3 inserts) for AA6351 ... corrosion alloy of aluminum that has a lot of…
data for implementing optimization process. The experiments were conducted by changing levels of cutting parameters (spindle speed, feed rate and cutting depth) in CNC turning machine. Surface roughness ... depth of…
steel based on Taguchi approach. AISI 1040 steel has wide application in manufacturing sector. Cutting speed (m/min), feed (mm/rev), depth of cut (mm), nose radius (mm) and cutting ... obtained and validated. It has…
level and focal length are investigated in order to obtain surface roughness with maximum cutting speed. The surface roughness is investigated for a laser power range of 1000–1500W ... with laser power and focal length…
study are limited to the following data; Depth of cut (1.0, 2.0, 3.0 mm), cutting speed (260, 320, 400 rpm), feed rate (0.15, 0.20, 0.30 mm/rev), tool nose radius ... tool acceleration. This effect interacts with other…
ø12 chatter free end mill cutter. The optimized cutting condition for tool wear are cutting speed of 250 m/min and axial depth of cut ... cutting conditions for better surface roughness are cutting speed of 250 m/min…
steel (47 HRC). The effect of machining parameters (de pth of cut, feed and cutting speed) on surface roughness parameters (Ra and Rz) were investigated by applying ANOVA. The experiments ... showed that surface…
neural network (ANN) model for prediction of surface roughness with independent variables feed rate, cutting speed and depth of cut. Turning was conducted on AISI 4140 STEEL work pieces using ... coated carbide cutting…
this research work the effect of insert nose radius and machining parameters including cutting speed, feed rate and depth of cut on surface roughness and material removal rate ... turning process is greatly influenced…
from measured cutting force components. Different cutting conditions have been considered by varying the cutting speed, the feed rate and the depth of cut. From a theoretical point of view ... strongly on the depth of…
plain factorial trials and based on multifactorial method of experimental design, the variable parameters: Cutting speed, feed per revolution and the depth of cut were designed. Modeling results helped ... generalized)…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.