Nowadays, inorganic membrane technology is considered as an attracting option for the separation and purification of hydrogen, particularly in the field of fuel cells supplying. The application of inorganic membranes…
than 80% of the original wastewater. The quality of NF permeates obtained at trans membrane pressure of 5 bar and crossflow velocity 7 m/s showed low values of salts ... fines and the recovery of high quality clean…
more beneficial in saving energy under high temperature conditions. In particular, inorganic H2 selective membranes have gained a great attention in the field of the hydrogen economy development
Inorganic membrane based techniques have been applied to various gas separation processes in the chemical process industries, especially in the separation of hydrogen fromhydrocarbons and carbon dioxide in synthesis
separation from flue gases. This review covers introduction of membrane includingpolymeric and inorganic membranes, provide recent advancements such as mixed matrix membranes, facilitated transport membranes and carbon…
synthesize new hydrocarbon ionomers, organic-inorganic hybrid membranes. Excellent thermal and chemical stability allows inorganic membranes to be used in high temperature and extreme pH applications. They have also…
oriented towards the optimization of the synthesis and characterization of such composite membranes to choose the best inorganic composition in terms of thermal stability and proton conductivity. The proton conductivity…
Recently, the use of inorganic composite mesoporous membranes in chemical industries has received ... attention due to a number of exceptional advantages including thermal stability and robustness. Inorganic mesoporous…
fitting the graphical method to the experimental results. To investigate effect of inorganic fouling onto the membrane performance, synthetic solutions (single solute) and two groundwater samples (multicomponent solute)…
ammonia synthesis process) and hydrogen recovery in refineries. However, in the last years also inorganic membrane technology has received a great attention, particularly for H2 separation from industrial gaseous…
degrade when they are exposed to aggressive environments. Therefore, great attention was directed towards inorganic membranes owing to their high mechanical and chemical stability and the possibility ... them numerous…
architecture of the synthesized hybrid interfacial materials. One key thrust for the functionalized porous inorganic membranes is to enable the use of larger nonzeolitic pores (>1 nm) for the greater ... Bischoff, et…
supported inorganic precipitate lead tungstate model membrane has been explained. The membrane potentials of inorganic membrane were measured with uni-univalent electrolytes (KCl, NaCl and LiCl) using saturated calomel…
reduced fuel cross over and easier water management. In recent times, organic-inorganic hybrid membranes have been developed by combining the beneficial properties of organic and inorganic materials by incorporating…
materials can be modified through various avenues. Zeolitic and catalytic nanoparticle coated ceramic membranes; hybrid inorganic-organic nanocomposite membranes and bio-inspired membranes (e.g. hybrid protein-polymer…
advantages and disadvantages that each of them gives to the desalination process. Firstly inorganic membranes, made mainly from zeolites, offer higher tolerance to a variety of feed waters and harsh ... standard gases…
environmentally friendly way. High-temperature polymer electrolyte membrane fuel cells (HT-PEMFCs) are based on hybrid materials where inorganic metal oxides and or carbon support materials are combined with ... polymer…
easily pore forming mechanism, low cost and smaller space for installation as compared to inorganic membranes. Commonly employed membrane fabrication phase inversion method has been shortly reviewed in this article
ammonia synthesis process) and hydrogen recovery in refineries. However, in the last years also inorganic membrane technology has received a great attention, particularly for H2 separation from industrial gaseous streams
cross-linker along with varying amount of phosphotungstic acid (PWA) as an inorganic additive. The membranes are prepared using sulfonated PEEK with an ion exchange capacity
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.