tixolex – 25 on mechanical properties like hardness, tensile strength and % elongation of virgin PTFE and different filled PTFE composites (filler content 5 – 50%) were made in order to achieve maximum ... composites…
Poly tetrafluoroethylene (PTFE) is a versatile engineering plastic. It has excellent chemical and water resistance, moderate mechanical and thermal properties, superior electrical insulation properties with low…
without barrier membranes. A recent systematic review concluded that high-density polytetrafluoroethylene (d-PTFE) membranes protect the grafting material and/or the initial healing clot from bacterial contamination…
friction and wear properties of 15% glass fibre and 25% glass fibre filled PTFE (Polytetrafluoroethylene) composites under dry friction conditions were studied. Meanwhile the influence of filler content, sliding…
Simultaneous gamma irradiation was used for grafting of styrene onto commercial PTFE films. Different parameters affecting the grafting such as solvent, irradiation dose and monomer concentration were investigated…
Commercial poly tetrafluoroethylene (PTFE) inserted in silica with ratio of 8% was chosen. Gamma irradiation was used for grafting of different ratios of styrene onto membrane ... while Ion exchange capacity was studied…
paper, we presented a light, reliable underwater robot made of Poly Tetra Fluoro Ethylene (PTFE) which has a high safety coefficient against the forces being applied on it in different
type of gas). Two different coating processes were used: plasma grafting of sprayed polytetrafluoroethylene (PTFE) using argon and helium plasma and thin-layer deposition by hexafluoropropene (C3F6) plasma. The abrasion…
Zinc-bromine flow battery stack consists of graphite bipolar plates and based on Nafion/PTFE composite membrane. Our battery stack is made up of three single batteries. The electrochemical behavior
printed circuit boards made of materials having a highly dielectric property are required. Polytetrafluoroethylene (PTFE) has an excellent dielectric property but poor adhesion property to metal because ... surface…
printed circuit boards made of materials having a highly dielectric property are required. Polytetrafluoroethylene (PTFE) has an excellent dielectric property but poor adhesion property to metal because ... surface…
tricuspid valves measured in echocardiography and measured in surgery from 35 mm and using PTFE strips. The rate of tricuspid regurgitation after mitral valve replacement with SJM mechanical valve ... effectiveness of…
whisker (PTW) and calcium sulfate whisker (CSW) on the tribological properties of the POB-PTFE composites was investigated. The results showed that POB-PTFE composites could be used ... seal material in Stirling engine…
filling process of dairy products. Biofilm formation on filling a test tube with PTFE liner and stainless steel 1.4404 hose connections were tested with pasteurized milk and UHT milk inoculated ... significant influence…
diffusion cell and different diffusion membranes. The membranes used for the study were Polytetrafluoroethylene (PTFE), Polyvinylidene fluoride (PVDF) and Dialysis membranes. Phosphate buffer pH 5.5 was the receptor…
this study is to compare the sustainability of tensile strength of Polytetrafluoroethylene (PTFE) and Polyamide suture materials in patients undergoing periodontal flap surgery. Material and methods: A total of fourteen…
wastewater and their characteristic pollutants were demonstrated. Two commercial hydrophobic membranes made of polytetrafluoroethylene (PTFE) and polyvinylidene fluoride (PVDF) were comparatively studied. The results…
sterilized membranes of P(VDF-TrFE)/BaTiO3 (TB group) and commercial membranes of e-PTFE (PTFE group) were randomly placed on the bone critical defects of all animals. Both bone ... volume and bone surface were not…
printed photopolymers compared to materials used in current ophthalmic devices (Silicone, Polytetrafluoroethylene (PTFE) and Poly methyl methacrylate (PMMA)) to assess 3D printed materials as a potential route for…
comparison between the performance of the developed TNTs-PES membrane, and commercial Polytetrafluoroethylene (PTFE) membrane was performed at different feed salt concentrations. The achieved results showed a…
device are closed, deploying the implant which is made of pretied sutures and PTFE-blades. Subsequently after realising this first step, the device is removed, leaving a full thickness permanent
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.