achieved pavement images with high noise, it brings difficult image processing and low crack detection. Therefore, it is significant to study a crack detection system processing high noisy images. This ... thesis…
four frequency features gives the best classification effect with 98% testing accuracy, 98.18% crack detection and 2.11% false reject, and that ... gives a better classification effect. For evaluating the effects of SVM…
detection system has certain practical significance. This paper mainly expounds the research of pavement crack detection based on image processing technology. This paper first expounds the relevant pavement damage…
carbon plate and screw fasteners. Until now, regular visual inspections were performed to detect crack ignition. Those operations were very time-consuming and they mobilized technical staff during several years
reached truly global standards. The main problem about a railway analysis is detection of cracks in the structure. If these deficiencies are not controlled at early stages they might lead ... property. This paper…
loss. Thus, many attempts in recent years have been made to deal with shaft crack detection methods. Cracks present in any structure deteriorate its performance. For detecting a crack present ... stiffness have been…
capture the voltage variation of cracked-dice. The results proofed, this apparatus successfully detects cracked-dice without compromising the testing throughput time
techniques presented by various researchers for a cracked structures. These methods use "finite element analysis techniques, together with experimental results, to detect damage in a fibre reinforced composites…
Molinero J, Jiménez-Suárez A, et al. (2017) Carbon nanotube-doped adhesive films for detecting crack propagation on bonded joints: A deeper understanding of anomalous behaviors. ACS Applied Materals
Therefore, it is necessary to discover a real, quantitative, and nondestructive method for early crack detection. In order to serve as a reference for locating a clinical detection method ... cracked teeth, this article…
system is based on a network of capillaries integrated in metallic structures to detect and monitor cracks by direct measurement of pressure changes. As these parts, like for example aircraft ... crack nucleation, crack…
root sections were dye stained and examined under stereo light microscope for crack detection. The collected data were statistically analyzed. Results: Only group 4 & group 5 (single-file rotary groups
PMMA. The rise of borax amount in PMMA caused to decrease the detection of the cracking within the composite as a function of borax amount. Two experimental configurations were used
surface. Results show that surface cracks less than 25 μm in width are detectable. Surface cracks both in the weld area and in the heat affected zone are detected
multi-field coupling method based on virtual crack closure is proposed to detect weld crack propagation in X80 pipeline by magnetic flux leakage method, in order to analyze the interference
simultaneously. For instance, vehicle-based image techniques are available for pavements’ mechanical behavior detection such as cracks, high-speed vehicle-based profilers are used upon request for the road ride
magneto-resistance (AMR) sensor. The sensor is intended to be applied for the detection of cracks in ferrous and non-ferrous metals. The AMR sensor detects the change
expected to encounter, aging problems such as fatigue cracking, stress corrosion cracking, corrosion, and wear. The critical fatigue component for the C-130 fleet is the center wing box, which ... with 30,000 or greater…
located at the stress concentration at the thread which is typical of fatigue crack initiation. The fatigue failure area is quite small compared to the rest of the failure surface ... fatigue must be done quite often…
sensors are. Because it is impossible to determine simple parameters for disturbingly wide cracks, damage detection employs an artificial neural network (ANN). A 100% correctly classified pattern and perfect…
uses an integrated methodology for detection, location and severity of damage in a plate like structure. Finite element analysis is used for simulating the crack model. In the first approach ... flexural oscillations…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.