Search Scholars Central
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
Advanced searchHide advanced search
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
Conference abstract · 2018 Conference abstract · 16 Nov 2015 Comparison of analytical, numerical and experimental test of pile behavior under static cyclic vertical loading tests in layered elastic–plastic soils
required settlement reduction. The present study focused on a comparative study between static cyclic vertical loading tests scale on two piles of different lengths (in Layered elastic-plastic soil) using
Review article · Feb 2014 Shear walls – A review
Shear walls are structural systems which provide stability to structures from lateral
Conference abstract · 22 Sep 2016 An experimental and analysis study on vibration control devices called as hybrid scaling-frame
herein. Also, to clarify the fundamental restoring force characteristics of HSFD, horizontal static cyclic loading test is conducted. From tests results, it is confirmed that the rigidity and strength ... observed that…
Conference abstract · 21 Jun 2018 BEHAVIOR OF SCREEN-GRID ICF REINFORCED CONCRETE WALLS UNDER SEISMIC LOADS
cyclic loading experimental program was performed to simulate earthquake action. Results of the cyclic loading test program indicated the energy dissipation capacity of the tested walls as well as their ... experimental…
Conference abstract · 26 Oct 2017 Effects of Loading Frequency on Cyclic Deformation and Fatigue Behaviour of Metastable Austenitic Stainless Steels
issue can be addressed using high frequency test systems, allowing the performance of cyclic loading tests in high to very high cycle fatigue regime in a reasonable time. However ... steel AISI 304 was analyzed…
Conference abstract · 26 Dec 2017 Effects of loading frequency on cyclic deformation and fatigue behavior of metastable austenitic stainless steels
issue can be addressed using high frequency test systems, allowing the performance of cyclic loading tests in high to very high cycle fatigue regime in a reasonable time. However ... steel AISI 304 was analyzed…
Conference abstract · 16 Oct 2017 An experimental study on resistant mechanism of embedded connection for steel square tube filled with filler: Effect of characteristics of filler
experimental studies as parameters with filling method and its materials. From the cyclic loading test results, it is confirmed that the bending rigidity and strength are enhanced by adhesive characteristics…
Conference abstract · 16 Oct 2017 Characteristics of seesaw system for vibration control of structures
shaped steel dampers, steel slit dampers, and friction dampers have been examined through cyclic loading tests, and the viscoelastic dampers and fluid viscous dampers have been examined through seismic response
Conference abstract · 16 Oct 2017 Prediction method of low cycle fatigue capacities of steel vibration control devices under random plastic deformation
summarized in Similitude Law of Prefracture Hysteresis. In this study, the plastic cyclic loading tests are conducted. From test results, the effect of ductility amplitude is expressed by a certain
Conference abstract · 16 Oct 2017 Study on ultimate seismic behavior and repair method of damaged steel frames
summarized in Similitude Law of Prefracture Hysteresis. In this study, the plastic cyclic loading tests are conducted. From test results, the effect of ductility amplitude is expressed by a certain
Research article · Jul 2014 Nonlinear response of a 1:4 scale model of 3-storey Reinforced Concrete frame with partially masonry infill walls
frame of 1:4 scale having brick infills was fabricated and push over test under cyclic loading with displacement control was performed. The structure was symmetric in plan and having
Research article · 2016 Study of the Effect of Cyclic Stress on the Mechanical Properties of Braided Anterior Cruciate Ligament (ACL)
tested under a cyclic stress to simulate the actual normal conditions. Knee simulator tester was designed to simulate the actual knee movement during the application of load ... tension-tension fatigue tester. The…
Conference abstract · 2018 Personalized design and 3D printing for human total ankle prostheses: In-silico and in-vitro experimental evaluation
three relevant implantable sets of customized articular surfaces for tibiotalar replacement. Mechanical tests under cyclic loading were performed on each specimen, before and after the implantation of each ... analyzed…
Conference abstract · 5 Oct 2018 Seismic performance of corroded reinforced concrete moment-resisting frame structures
frame specimens, including five corroded frames and one frame without corrosion, were tested under quasi-static cyclic loading. The corrosion ratio of longitudinal reinforcement and the axial compression ratio were…
Conference abstract · 16 Oct 2017 Coupled corrosion fatigue of A572 hot rolled steel beams
from A572 steel. Three groups of beams are tested. The first is tested only under cyclic loads to determine the reference fatigue life-time. The second group is tested ... small, medium and high corrosive environment)…
Conference abstract · 24 Jun 2019 Investigation of high temperature cyclic loading behavior of molybdenum-hafniumcarbide
this study the mechanical behavior of MHC was investigated after several cyclic loading patterns. The tests were performed under different stress levels and different speed conditions. Microstructural observations…
Research article · 27 Jul 2017 Extremely Low Cycle Fatigue Behaviors of Anti-Seismic Steel HRB400 Reinforcing Steel Bars under Strong Earthquakes
anti-seismic steel HRB400 reinforcing steel bars were comprehensively studied following the cyclic push-pull loading tests with extremely high strain amplitudes (up to ±12.8%). The cyclic stress response characteristics
Research article · 30 Dec 2019 Comparison between short segment pedicle and lateral mass screw construction strength for resisting flexion and extension motion in sub axial cervical spine
fatigue test. Data was collected and being tested by using a t-test. Result: The mean cyclic load 172 cycles in lateral mas screw construction and 367 cycles in pedicle
Conference abstract · 25 Jul 2016 Synthesis of dense and porous nanofibers by electrospinning
evaporation. Finally, the sensing ability of the prepared PZT nanofiber mats was tested under cyclic mechanical loading. In conclusion, the combination of morphology control, pre-firing and RTP might
Research article · 29 Jul 2020 Performance evaluation of tibia nail using finite element analysis and mechanical testing.
fragments were tested under axial loading and torsion. The constructs were tested to failure under cyclic fatigue loading. Results: The maximum stress was concentrated at contact area of standard nail
Conference abstract · 9 Nov 2017 Performance and design of an bolted joint connecting H-shaped beams and square hollow steel columns
stiffness, the stiffness of bolted connection between beams and columns changes with the applied load. During minor earthquakes, rigid connections can be achieved, while during moderate and major earthquakes ... flange…
Conference abstract · 16 Oct 2017 A study on restoring force characteristics and passive control design method of steel framed structures with scaling-frame
force characteristics, the horizontal static cycle loading test is conducted. The test results indicate that SF structure presents the hardening characteristics during inelastic cyclic loading. And the analytical study
Research article · 13 Sep 2018 A Conceptual model to explain and identify Rafsanjan Plain water governance: A grounded theory study
Fahmi, A. (2004). The solution of Terzagi deferential equation under cyclic loading and compare with laboratory tests results. M.S. Thesis, Department of Civil Engineering, Kerman University, Kerman, Iran. (In Persian
Research article · 2014 STATIC AND CYCLIC BEHAVIOUR OF HIGH PERFORMANCE CONCRETE BEAMS USING METAKAOLIN AND PARTIAL REPLACEMENT WITH QUARRY DUST
considered and there reinforcement ratios are uniform (0.75%) were fabricated and tested under both static and cyclic loading. It was observed that the deflection characteristics, crack Patten, ductility indices…

