Electrodeposition of nickel was studied by using rotating disk technique. The electrode substrate was glassy carbon disk cut from a glassy carbon wafer produced by Toshiba. The disk was mounted ... sweep voltammetry…
templateless method is introduced to fabricate anisotropic grown gold nano-dendrites by one-step electrodeposition in (3-Aminopropyl)trimethoxysilane (APTS)-contained electrolyte. Growing direction of branch and trunk
performed at 1000ºC. Instead of the high temperature process, medium and low temperature electrodeposition is fascinating as that can be hired as a new aluminum coating process. Several kinds ... baths are captivating…
rate of electrodeposition of copper plates was determined bymeasuring cathodic limiting current in absence and in presence of carbohydrates as(Glucose, fructose, mannose, sucrose, lactose and maltose). It is found…
deposition and temperature of the system on the morphological and optical properties of electrodeposited Cu2O thin films. CU2O thin films were electrodeposited on FTO substrates in copper sulphate solution
cost advantages. Here, we report the results of our study on the co-electrodeposition of a Zn-rich precursor metallic alloy Cu- Zn-Sn film from a single water-based ... results revealed that device-quality absorber…
Superhydrophilic vertically aligned multi-walled carbon nanotubes were used as substrate to direct hydroxyapatite electrodeposition. Conventional Nickel/Titanium alloys were used for comparison. Results show that the…
Zinc has been the widely used electrodeposits for protection against corrosion because of sacrificial action. Zinc bath to produce nano zinc coatings were optimised using Hull cell studies. Characterisations…
immobilized with nanoparticles of platinumwas investigated. Platiniumnanoparticle (PtNPs) -modified electrodes were prepared by the electrodeposition with cyclic voltammetric method onto glassy carbon electrode. The…
electrodeposition of ternary zinc-nickel-iron alloywas studied in acidic sulfate bath. The comparison between Zn, Ni, Fe deposition and Zn-Ni and Zn-Ni-Fe codeposition revealed that ... deposit composition. The…
Nanocomposites made by electrodeposition consist of a nanocrystalline (grain size <100 nm) metal matrix with co-deposited second phase particles (e.g. ceramics, polymers) in the nanometer to micrometer size range
biosensor for continuously monitoring lactate levels in vivo was fabricated based on the co-electrodeposition of lactate oxidase (LOX) and an osmium-containing low-potential redox polymer ... simple electrochemical…
composite coatings were obtained by electrodeposition from a Ni-Mo plating bath containing suspended Al particles. The factors including temperature, current density, and stirring rate affecting coating composition…
Electroforming is an extension of electrodeposition process wherein one metal is deposited onto a cathode in the shape of a required geometry called a ‘mandrel’. After deposition the mandrel
MnO2 coated with reduced graphene oxide (MnO2@RGO) has been prepared by step galvanostatic electrodeposition (Figure 1). Firstly, MnO2 is deposited on the electrode surface by anodic galvanostatic method
conducting polymers. The hybrid NiCo2O4 modified carbon fiber paper (NiCo2O4/CFP) composites with different electrodeposited times of polypyrrole (PPy) layers were prepared by two-step process. At first, NiCo2O4…
this research, Cu/SiC/graphite nanocomposite coatings were fabricated by using pulse current (PC) electrodeposition method in the sulfate bath. The effects of PC parameters, like frequency, duty cycle, current
controlling parameters; i.e., starting materials (precursor metal salts) solution concentration, time of deposition and electrodeposition potential. Structural, compositional, morphological and optical properties as…
scaffold to nucleate AuÃ?¢Ã?Â?Ã?Â?Pt alloy nanostructures by electrodeposition together with reduced Graphene Oxide (rGO). The engineered phage with Y3E peptides could specifically nucleate AuÃ
Thin films of Zn-Al-GO nanocomposites were prepared by electrodeposition in chloride bath solution with different concentration of dispersed graphite oxide (GO) colloid and Aluminum silicate. The various bath
magnetron sputtering, metal-organic chemical vapor deposition, pulsed-laser deposition, molecular beam epitaxy and electrodeposition. Among these methods, the electrodeposition method has some advantages to prepare…
This review paper summarized the preparation of ternary chalcogenide thin films using electrodeposition method. Electro deposition method is emerged as one of the most preferred deposition technique to produce large
biosensor was developed based on the gold-graphene nanocomposite material prepared by one-step electrodeposition. The nanomaterial formed on a glassy carbon electrode was proved by scanning electron microscope
triazine-2,4-dithiol monosodium (DBN) was fabricated by two-step potential electrodeposition onto aluminum alloy for corrosion protection. The structure, surface wettability and corrosion protection of the polymeric…
surface of the scaffold. In this talk, we will describe how a “flow-through” electrodeposition process is applied for mineralization of 3D scaffolds composed of multiwall carbon nanotubes and chitosan ... demonstrated…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.