HEAT TRANSFER ANALYSIS OF RECUPERATIVE AIR PREHEATER
flue gas flow phenomenon and air flow phenomenon are discussed using Laminar model, k-ε model, k-ω model and SST model. The parameters like temperature distribution, heat flux, pressure
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
flue gas flow phenomenon and air flow phenomenon are discussed using Laminar model, k-ε model, k-ω model and SST model. The parameters like temperature distribution, heat flux, pressure
turbulence model is more accurate than standard k – ε model, RNG k – ε model and standard model k–ε models. For lift coefficient, it is found maximum error by Spalart
using HYDRAGON code. The effect of three turbulence models, i.e., a standard k-ε model, a re-normalized group (RNG) k-ε model and a realizable k-ε model were
Strength of modern computer for computational analysis is increasing day by day
simulate a process of atomization and evaporation of liquid coolant. The realizable k-ε model was employed for turbulence modeling. Parametric study was carried out by varying the coolant flow
kinetic theory of granular flow (KTGF). The re-normalization group (RNG) k-ε model was applied for implementing the turbulency. Effect of inlet gas velocity on overriding parameters, such
energy and distribution of the species contained in smokes to which we associate k-ε closure model. To handle this combustion phenomenon, we use the FLUENT code that directly ... integrates all the equations on…
tackled as well. Namely, some results obtained with eddy-viscosity model i.e. standard k-ε model were compared with results obtained with k-ξ-f model of turbulence in domain
k-ε turbulence model which is a buoyancy-corrected model. The numerical simulation results are compared to other models and experimental data experiments. The study demonstrates that GGDH k-ε
k-ε turbulence model which is a buoyancy-corrected model. The numerical simulation results are compared to other models and experimental data experiments. The study demonstrates that GGDH k-ε
study the fluid interaction and the size and shape of the bubble. Realizable k-ε turbulent model, which is an eddy-viscosity turbulence model, performed reasonably well for the thin
CFD simulations were used to investigate the mixing quality for water-oil
techniques solved the continuity, momentum and energy conservation equations in addition to standard k – ε model equations for turbulence closure (The use K-epsilon turbulence mode was recommended
Averaged Navier-Stokes equations (RANS) and the vicious model is the turbulent standard k-ε model. A fully-developed power-law profile is assumed for the inlet stream wise velocity
Direct resolution of shear stresses (Mentors SST Model) and use of wall function (K-ε Model) is assessed.CFD analysis results are compared with the wind tunnel test data available
nozzle that represents the exhaust nozzle of a supersonic combustion ramjet (SCRAMJET) is modeled. Jet from the nozzle is issued into a domain which is bounded on one side ... k-ε model has been used to examine…
carried out using Ansys CFD as a simulation tool and ICEM CFD as a modeling tool for 2-D corrugated airfoil. The design features of corrugated airfoil used in this ... earlier studies. The simulation includes a sharp…
concerned with a numerical two-phase flow model combining with the Realizable k–ε turbulent model for simulation of flows around a fixed-cone valve. The equations were solved with
resolution of the Navier-Stokes equations in conjunction with the standard k-ε turbulence model. These equations were solved by a finite volume discretization method. The developed numerical results
place within street canyons right after traffic pollutants are emitted is implemented to the model in order to assess the concentrations of NOx and ozone in space. Circulations created ... street canyon has been…
water flowing upward in a vertical heated pipe is carried out using a RANS model in the CFD ANSYS CFX v14.0 code. CFD confirms the occurrence of density wave oscillations ... solutions. The CFD results are for 2-D…
reactor core. Single-phase fluid flow equations are solved using the k-ε turbulence model by ANSYS CFX 18. The model is validated using available experimental data
package based on finite volume method to solve Navier Stokes Equations and the k-ε turbulent model. The numerical investigations are done to study the effect of the diffuser expansion
open source CFD code OpenFOAM. The simulations were carried out using low Re k-ε turbulence model. OpenFOAM simulations predicted the flow structure and temperature distribution near the wavy wall
structured grid using an upwind difference scheme. The numerical simulation used the standard K-ε turbulence model to account for the turbulence effect. Pressure distribution and vapor volume fraction were
For authors and organisers
Find the right journal for your paper and submit your manuscript.