Scholars Central

Conference abstractPublished 7 Dec 2016

Physical and barrier properties of flexible films based on arrowroot obtained by thermoplastic extrusion

Authors: Amanda Dambros Pereira, Fabio Yamashita, Lucia H. Inocentini Mei, Jose Ignacio Velasco, Marcelo Antunes, Farayde M. Fakhouri

Universidade Federal da Grande Dourados of Engineerin, FAEN Universidade Estadual de Londrina, UEL Universidade Estadual de Campinas, FEQ Universitat PolitÃ?¨cnica De Catalunya- Barcelona Tech, Brazil

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

The arrowroot is a plant from Latin America and is natively in Venezuelan forests. The size of the rhizomes is between 10 and 25cm are fusiform shape, elongate and have small segments, separated by light provided bottlenecks scales. The arrowroot can get to have 20% of starch and fibers remaining. Therefore the aim of this was to use trablho starch and arrowroot fiber for the production of biodegradable films by thermoplastic extrusion process. It was used glycerol, 30% relative to the weight of starch as platificante. Four samples were prepared, as follows: i) pure starch, ii) Starch + 0.5% fiber, iii) Starch + 1% fiber and iv) Starch + 1.5% fiber. Utilizing the BGM brand extruder (Model EL-25, SaoPaulo, Brazil) used and the processing conditions Fakhouri (2009). After extrusion the films were conditioned for 48 hours at 25Ã?°C and 50% RH, so that it was characterized for thickness, permeability to water vapor (PWV) and for its solubility in water and acid. The films with the naked eye showed a whitish and when colocaraÃ?§Ã?£o greater the fiber concentration in the sample, the more resistance to the touch. The esperssuras were 0.2440; 0.3018; 0.6063 and 0.2760 mm respectively for sample i, ii, iii and iv. The PVA showed an increase with the increase in the fiber sample. Little difference was observed when 0.5% of fiber was added to amosta (range 12 to 13 g.mm/m2.d.kPa), when most fiber was incorporated into the film, a considerable increase in the vapor permeability water was observed, possibly due to possible rupture zones in the filmogenic matrix. The arrowroot starch films made arrowroot fiber were 100% soluble in acid and showed a 30% solubidade in water for pure starch film and 26.6266% for film with 1.5% fiber.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Bioremediation & Biodegradation
  • BylineArticles whose byline prints “Amanda Dambros Pereira”
  • BylineArticles whose byline prints “Fabio Yamashita”
  • BylineArticles whose byline prints “Lucia H. Inocentini Mei”
  • BylineArticles whose byline prints “Jose Ignacio Velasco”
  • BylineArticles whose byline prints “Marcelo Antunes”
  • BylineArticles whose byline prints “Farayde M. Fakhouri”