Scholars Central

Conference abstractPublished 14 Mar 2018

Multi-layer PVD coatings for longer lasting orthopaedic implants: A tribocorrosion evaluation

Authors: Raisa Chetcuti, Joseph Buhagiar, Peter A Dearnley, Bertram Mallia

University of Malta, Malta Boride Services Ltd, United Kingdom

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Bone injuries coupled with a longer life expectancy necessitate the increased longevity of implanted biomaterials in patients suffering from bone diseases such as arthritis and osteoporosis. CoCrMo alloys have been widely employed as bearing surfaces in metal-on-metal (MoM) orthopaedic implants given their optimal mechanical properties and high corrosion resistance, as well as their relatively low wear rates and the post-operative stability. Loss of material by corrosion-wear of the hip joint and metal ion release into the blood stream are of prime concern as these can cause adverse reactions in the human body such as inflammation and bone erosion as well as loosening of the implant. This study aims to reduce the material loss at the bearing surfaces by the application of a multi-layer PVD coating on an ASTM F-1537 CoCrMo substrate. A 2.3 Ã?µm thick CrN coating was deposited on top of a 3.6 Ã?µm CoCrMo precipitate free supersaturated metastable solution of carbon, otherwise known as S-phase (S), by magnetron sputtered PVD. The coated samples designated as CrN/S, displayed a higher hardness and they retained their topography in nano-scratch tests relative to the uncoated CoCrMo substrate under the same conditions. Tribocorrosion tests for uncoated CoCrMo samples against uncoated CoCrMo counterfaces as well as for coated samples against coated counterfaces were conducted in RingerâÂ?Â?s solution as well as in diluted Foetal calf bovine serum at 37Ã?±1 Ã?°C under reciprocating sliding conditions. Results show that under all applied potentials and in both solutions, the coated tribopairs when compared to the uncoated ones exhibited a significant decrease in material loss and excellent resistance to catastrophic failure by tribocorrosion. Figure 1 outlines the improvement exhibited by the coated samples under anodic conditions; the coated samples exhibiting a smaller wear scar and mostly polishing wear as opposed to the uncoated samples, in both solutions.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Biotechnology & Biomaterials.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Biotechnology & Biomaterials
  • SubjectBiochemistry & Biotechnology
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Raisa Chetcuti”
  • BylineArticles whose byline prints “Joseph Buhagiar”
  • BylineArticles whose byline prints “Peter A Dearnley”
  • BylineArticles whose byline prints “Bertram Mallia”