Scholars Central

Conference abstractPublished 5 Apr 2017

Influence of selective laser melting mode on the structure and phase composition of Ti-Nb alloy

Authors: Margarita A Khimich, Anna Yu Eroshenko, Zhanna G Kovalevskaya, Alexander A Saprykin, Yurii P Sharkeev

ISPMS SB of RAS, Russian Federation

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Ti-Nb alloys are perspective for implants production. Titanium and its alloys have high elastic modulus (100-120 GPa). Due to their features alloys of Ti with (40-45) wt. % Nb have modulus close to that of bone. Selective laser melting (SLM) allows obtaining of low-modulus Ti-Nb alloys and items of complex shape. Change of SLM parameters affects the size of structural elements and phase composition of resulting product. The purpose of this study was to investigate influence of SLM parameter change on the structure and phase composition of Ti-(40-45) wt. % Nb alloy. 3-D specimens obtained in Yurga Institute of Technology (Russia) on âÂ?Â?VARISKAF-100MVSâÂ? installation were investigated. To obtain the alloy the composite powder of titanium and niobium was obtained by mechanical activation of titanium and niobium powders mixture in AGO-2C ball mill (AltSTU, Barnaul, Russia) and was layered on titanium substrate. After activation composite powder was annealed in vacuum at 500Ã?°C during one hour. The thickness of each layer was 0.05 mm. Melting process was carried out in Ar atmosphere. Specimens were formed with the laser beam of 80 W-power. The spot diameter was 150 Ã?¼m, scanning step was 0.4 mm. As a changed parameter laser beam scanning velocity was selected. It was changed in the range 40-70 mm/sec with the step of 10 mm/sec. The results of investigation have shown that the alloy obtained by SLM has an elemental composition of Ti-45 wt. % Nb. Powder is completely melted and crystallized during SLM. The structure is represented by two phases. They are the main Ã?²-solid solution of titanium and niobium and Ã?±''-Ti containing Nb. The microstructure contains zones with fine and medium grains. Shrinkage and gas pores are observed in specimens.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Biotechnology & Biomaterials.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Biotechnology & Biomaterials
  • SubjectBiochemistry & Biotechnology
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Margarita A Khimich”
  • BylineArticles whose byline prints “Anna Yu Eroshenko”
  • BylineArticles whose byline prints “Zhanna G Kovalevskaya”
  • BylineArticles whose byline prints “Alexander A Saprykin”
  • BylineArticles whose byline prints “Yurii P Sharkeev”