Editorial · 30 May 2025
Conference abstractPublished 26 Jun 2013
Effect of mass transfer and characterisation of aeration & agitation in xanthan gum production using oxygen vector
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Oxygen mass transfer represents the most important parameter involved in the design and operation of mixing-sparging equipment in bioreactors. It can be described and analyzed by means of the mass transfer coefficient, kLa. The kLa values are affected by many factors such as geometrical and operational characteristics of the vessels, microorganism morphology, biocatalysts properties, composition, type & concentration of media. Oxygen mass transfer rate have been studied during xanthan gum production process in stirred tank bioreactor. The volumetric mass transfer coefficient, kLa, has been measured by dynamic technique in solution of xanthan gum for a wide interval of operational condition. This coefficient has been determined changing many variables such as air flow rate, agitation speed, and superficial velocity. The efficiency of oxygen transfer could be enhanced by adding oxygen-vectors in broths, such as hydrocarbons or fluorocarbons, without increasing the energy consumption for mixing or aeration. The work was aimed at investigating the mass transfer effects of xanthan gum production by using oxygen vectors from Xanthomonas campestris. Since the solubility of oxygen is very low in fermentation broth, it becomes a growth-limiting substrate the for xanthan gum production. The use of oxygen vectors will enhance the oxygen solubility should necessarily increase the kLa and hence oxygen transfer rate (OTR). In this work, the effect of oxygen vector n-dodecane on the xanthan gum production was compared with that of control without oxygen vector. Experimental results obtained for simulated broths indicated a considerable increase of kLa in the presence of n-dodecane, and the existence of a certain value of n-dodecane concentration that corresponds to a maximum mass transfer rate of oxygen.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Biotechnology & Biomaterials.
Editorial · 30 May 2025
3D Bioprinting of Vascularized Tissue Constructs Using Bioink-Embedded Endothelial Cells
Editorial · 30 May 2025
Development of Flexible Bioelectronic Interfaces for Real-Time Neural Signal Monitoring
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Biotechnology & Biomaterials
- SubjectBiochemistry & Biotechnology
- SubjectMaterials Science
- BylineArticles whose byline prints “K. Vasantharaj”
- BylineArticles whose byline prints “A. B. Sathya”
- BylineArticles whose byline prints “R. Sivashankar”