Research articlePublished 3 Sep 2021
Evaluating the effect of milling speed and screen size on power consumed during milling operation
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
This study was conducted to evaluate the effect of rotor speed and screen size on power consumed during milling operation. The milling system was tested using three fish feed ingredients; bone meal, groundnut cake and maize, the moisture content of the ingredients bought from the market are 13.1%, 14.7% and 17.5% dry basis respectively. The milling machine was evaluated with 3 kg of each feed ingredient and was replicated three times for each of the experimental parameters. The machine parameters varied during the experiment includes four screen size (1.5 mm, 2.0 mm, 2.5 mm and 3.0 mm) and five rotor speeds (1500 rpm, 1800 rpm, 2100 rpm, 2400 rpm and 2700 rpm). Regression analysis was carried out on the data collated. The analysis was used to develop model which is capable of predicting the electrical energy (kJ) consumed. There was no significant effect of screen size on the average power consumed during milling since there is no linear relationship between power consumed and screen size. However, there is a significant effect of speed on average power consumed, the power consumed increases as speed decreases therefore making milling operation at higher speed to be cost effective since it doesn’t require much power to achieve the required output. The P-Value depicts that screen size has no significant effect on the electrical energy consumed during the milling operation while speed has significant effect on the electrical energy used at 95% confidence level.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalInsights in Aquaculture and Biotechnology
- SubjectAgriculture, Food & Aqua
- SubjectBiochemistry & Biotechnology
- BylineArticles whose byline prints “A.A. Adenigba”
- BylineArticles whose byline prints “S.D. Oluwagbayide”
