Conference abstractPublished 19 Mar 2018
Selective laser melting of a new tailored aluminium alloy (SilmaAl® AlSi7Mg0.6) for aerospace industry
Chemnitz University of Technology, Germany
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In recent years the demand for additive manufactured components has experienced a considerable boost due to increased technical, economic and geometrical requirements. Above all for the aerospace industry, the additive production technology is predestined for the production of tailor-made and geometrically complex components. In particular, laser powderbed fusion (LPB-F) is characterized as an innovative and directional production process with enormous potential. Aluminum alloys are excellent lightweight materials due to their comparatively high stiffness and strength combined with low weight. However, the current use in the additive production process is limited by the comparatively difficult processing and which can lead to undesired low material densities. The focus of the work was the development of suitable LPB-F process parameters for higher strength and low oxygen aluminum alloy AlSi7Mg0.6 (SilmagAl®). In this context, material densities of approx. 99.98 % could be achieved (Figure 1). In the second step, mechanical investigations were carried out under static load. A comprehensive trade-off and comparison was made between different heat treatments (Figure 2). In the static range, yield stresses of up to 300 MPa and tensile strengths of up to 430 MPa have been achieved. The fracture elongation at break could be adjusted accordingly with values up to 20 %. Hence processing of this improved aluminum alloy and the generated mechanical properties, new application potentials in the aerospace sector will open up, e.g. for future hydraulic components.
Subjects
EngineeringPhysics & AstronomyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectEngineering
- SubjectPhysics & Astronomy
- BylineArticles whose byline prints “Camilo Zopp”