Scholars Central

Conference abstractPublished 1 Aug 2016

Studies of actual shapes of probes used for AFM tip-based nanomachining

Authors: Zaynab N Alraziqi

Cardiff University, UK

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Abilities of Atomic Force Microscope (AFM) tips to remove materials during nanomachining depends critically on the tip bluntness. To describe the actual shapes of AFM tips, four diff erent non-axisymmetric tips as received from the manufacturer were studied. Each tip was scanned first along a tip characterizer; and then it was used for depth-sensing nanoindentation of soft elastic polycarbonate (PC) samples. Th e tip characterizer is a special test structure consisting of an array of silicon sharp pin-like tips. The devices employed allowed us to extract very accurate data on the real shapes of the tips. Before the use of the tip characterizer, after its use, and aft er nanoindentation, two-dimensional Scanning Electron Microscope images of the tip profi les were obtained. The images showed that AFM tips were undamaged. The actual tip bluntness was characterized by approximation of the shape as powerlaw functions of degreed. Th e values of d extracted by the power-law fitting of the tips gave d ≈ 2. However, AFM tips are not fixed vertically but they are actually inclined by 12o to the cantilever beam. Applying the Borodich contact problem rescaling formulae to the load-displacement curves, one can also extract the degree d of the shape bluntness; the d values were in the range 3.4-4.5. These values were in agreement with the power-law fitting of the inclined tips. Th e inclination of the tip can aff ect suffi ciently the effectiveness of nanomachining. Bluntness of the AFM tips used for studying the surface topography can be also characterized by the above procedure.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectNanotechnology
  • BylineArticles whose byline prints “Zaynab N Alraziqi”