Mini review · 18 Mar 2023
Short communicationPublished 22 Sep 2020
Effect of nano-clay mineral addition on tribological properties on jute/epoxy composite by using design of experiments approach
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Polymer nano-composites have received immense attention in the recent years, as many of these materials present promising properties like high flexural strength, improved pressure barrier properties and depleting flammability. Polycarbonate is one of the most interesting ones, due to characteristic properties like high toughness and strength, excellent ballistic strength and good visual clarity. It could be expected that the addition of relatively low percentages of nano-reinforcements will result into remarkable improvements in mechanical and thermal properties. In this work, (Cloisite 25A) nano clay, Araldite LY 556 epoxy, HY 951 hardener were used to prepare the matrix at various blends 0%, 4%, 8%, and 10% by using hand layup method. And further detailed analysis was performed to study the tribological property of various percentage nano-clay (Cloisite 25A) loaded epoxies, with inclusion of jute fiber using Taguchi’s technique. For this purpose, the test samples were prepared according to the ASTM: G99 standard, and the test was carried out with the assistance of Pin-on- Disc machine. For this experimentation L16 orthogonal array was used to evaluate the tribological property with four control variables such as % of nano-clay content, normal load, sliding velocity and sliding distance at each level on friction co-efficient along with wear rate. From the obtained results the combination of factors greatly influenced the process to achieve the minimum wear and coefficient of friction for jute fiber reinforced laminates were analyzed. The microstructure behavior of the fabricated samples were investigated with assistance of Scanning Electron Microscope (SEM), particle distribution was analyzed throughout the matrix by Transmission Electron Microscopy (TEM) analysis before and after the wear test. ANOVA analysis revealed the nano clay contribution on coefficient of friction and wear of the jute fiber laminate composites.
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Archives in Chemistry.
Short communication · 29 Aug 2022
Protective Effects of p-CA Against Acute Liver Damage Induced by LPS/D-GalN in Wistar Albino Rats
Short communication · 29 Aug 2022
The Anti-Sepsis Effect of Isocorydine Screened from Guizhou Ethnic Medicine is Closely Related to Upregulation of Vitamin D Receptor Expression and Inhibition of NFkB p65 Translocation into the Nucleus
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalArchives in Chemistry
- SubjectChemistry
- BylineArticles whose byline prints “Heruthunnisa Shaik”
- BylineArticles whose byline prints “B Chandra Mohan Reddy”
