Scholars Central

Research articlePublished 21 Sep 2016

Characterization and adsorption studies of activated carbon and polymer coated sawdust for the removal of various pollutants from industrial wastewater

Authors: Supriya S., Palanisamy P. N.

Der Chemica Sinica

Volume 6 · Issue 6 · Pages 66–71

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Activated Carbon of high adsorption capacities were prepared from Casuarina by various physical and chemical processes followed by activation at 800ºC. The physico-chemical characteristics such as moisture content, volatile content, Specific gravity, Porosity, bulk density, pH, conductivity, Methylene blue number, iodine number were also investigated in order to understand the adsorptive capacity of activated carbon prepared from the agricultural waste. The present study analyses the feasibility of removing colour and reducing various water quality parameters like BOD, COD, alkalinity, etc., from the effluent samples collected from different industries using activated carbon (CAC) and polypyrrole coated sawdust (PPy/SD) prepared from Casuarina as adsorbents. Several other parameters such as chlorides, sulphates, TDS, pH and hardness present in the effluent sample before and after adsorption were also measured and were found to be in par with the permissible limit

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalDer Chemica Sinica
  • SubjectChemistry
  • SubjectEngineering
  • SubjectEnvironmental & Earth Sciences
  • BylineArticles whose byline prints “Supriya S.”
  • BylineArticles whose byline prints “Palanisamy P. N.”