Research articlePublished 15 Dec 2016
Design and Development of a Smart Auto Intruder Alarm System with GSM Network
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
This project is based on the design and construction of an intruder detecting and alerting system. This was achieved using an AT89C52 microcontroller for the control of the other component, a SIM900-GSM module that communicates between the home owner phone and the PIR sensor (motion sensor). The interfacing between the GSM module and the microcontroller was achieved using an IC called MAX232 (this IC converts TTL voltage level (+5V) to RS232 voltage level (plus minus 7.5V) vice versa) and the microcontroller was programmed using assembly language. At the end of this project we were able to design and construct a device that is not only cheap but efficient. We overcome the problem of false alarm by using a PIR sensor (passive infrared: this sensor only respond to infrared emitted from the human body and animals) and after testing, the microcontroller responded to the information sent by the PIR sensor and in the occurrence of intrusion send an alert message to the home owner as well sounding an alarm to alert the neighbours using a buzzer.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalInternational Journal of Innovative Research in Computer and Communication Engineering
- SubjectComputer Science & IT
- SubjectEngineering
- SubjectSocial Sciences & Humanities
- BylineArticles whose byline prints “M.Ehikhamenle”
- BylineArticles whose byline prints “B.O. Omijeh”