Scholars Central

Conference abstractPublished 2019

Silica suspensions combined effect with PPG, polymer and low salinity water flooding for enhanced oil recovery

Authors: Imran Akbar, Zhou Hongtao, Muhammad Usman Tahir

China University of Petroleum, China

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Low salinity water flooding (LSWF) and preformed particle gel (PPG) have recently drawn great interest from the oil industry. LSWF can only increase displacement efficiency, and it has little or no effect on sweep efficiency whereas PPG can plug fractures and improve sweep efficiency, but they have little effect on displacement efficiency. The coupled method bypasses the limitations of each method when used individually and improves both displacement and sweep efficiency. Polymer gels have been widely applied to plug high permeability streaks or fractures, and to improve sweep efficiency of chase water floods. The oil recovery from fractured reservoirs is usually low, which is usually caused by the existence of areal formation heterogeneity. Combining two methods in one process to enhance oil recovery represents a needed cost savings in the oil industry. Microgels are used as conformance control agents to improve oil sweep efficiency and control excess water production. Low-salinity water flooding (LSWF) is used as a wettability alteration agent in carbonate reservoirs and improves displacement efficiency. We developed a cost-effective, novel, enhanced oil recovery (EOR) technology for carbonate reservoirs by combining the four technologies into one process. The objective of this paper is to provide a comprehensive understanding of the combined technology and to demonstrate how the combining method can improve oil recovery. The oil-wet carbonate cores provided a higher improved oil recovery than waterwet carbonate cores during LSWF compared to traditional bulk gel treatments, PPG forms stronger plugging but will not form an impermeable cake in the fracture surface; therefore, PPG allows low salinity water to penetrate into the matrix, thereby producing more oil from the matrix. Preformed particle gels (PPGs) is a diverting agent that is used to solve the conformance problem in low permeability rich oil zones. It is injected to reduce thief zone permeability and then divert displacing fluid into poorly swept zones. The focus of this study is to see how PPGs, low water salinity, polymer and silica particles perform in porous media by creating flow resistance to injected fluid thereby changing the wettability and enhancing the sweep and displacement efficiency. Silica particles modify the surface wettability and also modify the gel particles strength, LSWF modify the mechanical properties of PPG such as swelling ratio, and polymer increase the sweep efficiency of chase water flood and PPG plug the high permeability zones to divert the water flow into low permeability zone to displace the remaining oil.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Chemistry and Applied Chemical Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Chemistry and Applied Chemical Engineering
  • SubjectChemistry
  • SubjectEngineering
  • BylineArticles whose byline prints “Imran Akbar”
  • BylineArticles whose byline prints “Zhou Hongtao”
  • BylineArticles whose byline prints “Muhammad Usman Tahir”