Research articlePublished 17 Nov 2022
Potentiality of Iron and Aluminum Extraction from Crude Phosphoric Acid using Modified Polyurethane Foam and Activated Carbon
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The preparation of Iron (III) and Aluminum (III) adsorbents by impregnating two solvents namely, tri-octylamine (TOA) upon Polyurethane foam (PU) and charcoal (C) (charcoal) The relevant factors affecting solvents impregnation process including, solvents concentration, shaking time, volume/mass ratio, impregnation temperature and type of diluents were studied. Also, the adsorption characterization of the prepared adsorbents has studied. The optimum conditions affecting adsorption of Iron (III) and Aluminum (III) at pH of 3, temperature of 25°C for 1h and m/v ratio 10 g/L were the best conditions to remove Iron (III) and Aluminum (III). crude phosphoric acid (WPPA) used as a case study and showed a decrease in Iron and Aluminum from 8500 mg/L and 4234 mg/L to 5117 mg/L and 2012 mg/L.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Environmental Analytical Chemistry
- SubjectChemistry
- SubjectEnvironmental & Earth Sciences
- BylineArticles whose byline prints “Marwa M. Qayed”
