Conference abstractPublished 20 Oct 2016
Using laser-induced jets fabrication method to control the particle size and alloy ratio of nanoparticle arrays
National Synchrotron Radiation Research Center, Taiwan
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In this study, we developed a new method.based on laser-induced jets of nanoparticles (NPs) and air drag forces.to select the particle size and control alloy ratio of NP arrays. First, thin metal (Au, Ag) films having a thickness of 35 nm were deposited on fused silica substrates through a sputter system. In addition, we can control the metal thin film ratio (Au/Ag, Ag/Au/Al) to manufacture variety alloy NPs. The pulsed laser light (Excimer laser) was irradiated on the rear side of the metal film-deposited fused silica substrates to generate jets of NPs. The incident wavelength of an excimer laser was varied to ensure good photo-to-thermal energy conversion e.ciency. We then exploited air drag forces to select NPs with sizes ranging from 5 to 50 nm at di.erent captured distances. Controlling the jet distances allowed us to finely tune the localized surface plasmon resonance (LSPR) wavelength. We further calculated the relationship between the air drag force and the diameter of the NPs to provide good control over the mean NP size (capture size >300 ƒÊm) by varying the capture distance. Laser-induced jets of NPs could also be used to fabricate NP arrays on a variety of substrates, including Si, glass, plastic, and paper. This method has the attractive features of rapid, large-area preparation in an ambient environment, no need for further thermal annealing treatment, ready control over mean particle size, and high selectivity in the positioning of NP arrays. Detailed analysis and results will be reported in the conference
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectNanotechnology
- SubjectPhysics & Astronomy
- BylineArticles whose byline prints “Shao-Chin Tseng”