Scholars Central

Conference abstractPublished 7 Nov 2016

The effect of porosity on mechanical properties of TiNi biomaterials

Authors: Yeon-wook Kim

Keimyung University, Republic of Korea

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

TiNi shape memory alloy fibers were prepared by a melt overflow process. The martensitic transformation starting temperature of B2→B19’ in the rapidly solidified fibers was 19 °C. Cylindrical billets of Ni-rich Ti-Ni alloy with 75% porosity were produced by a vacuum sintering technology using as-cast alloy fibers. The mechanical properties and shape memory properties of the highly porous Ti-Ni alloy is investigated using a compressive test. The plateau of the stress-strain curve was observed at about 7 MPa and resulted in 8% elongation associated with stress-induced B2→B19’ transformation. Because of the high porosity of this specimen, the elastic modulus of about 0.95 GPa could be obtained. It was also found that a recovered strain was 5.9% on heating after the compressive deformation. This recovery of the length is ascribed to the shape memory effect which occurs during the martensitic transformation.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Yeon-wook Kim”