Research article · 24 Feb 2026
Research articlePublished 2021
Use of robotic additive manufacturing for the shaping potentials lattice geometries from extruded biopolymers
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In the research carried out for the development of a robotic additive manufacturing process, rectangular prisms were manufactured from a biopolymer composed of water, glycerin and corn starch. In a first stage, experimental test benches were implemented to select the extruder components and also to define the raw material combination: starch percentage (15%, 20% and 25%) and glycerin percentage (0%, 15% and 30%). The material was extruded at two pressure levels and at five extruder speed levels, obtaining extrusion speed ranges, the rate of extruded material and the extrusion diameter of the material. In a second stage, these parameters were adapted to control the positioning of the extruded material by means of an 8DOF robotic platform, and thus define impressions with lattice-type shapes and topologies. Finally, when the manufactured parts were obtained, they were characterized dimensionally and mechanically by compression. The potential use of the strongest mixture, was selected to load a model active pharmaceutical ingredient, showing a low modification in the mechanical and geometrical effects of the final device
Subjects
EngineeringEnergy & PowerAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Electrical Engineering and Electronic Technology.
Editorial · 30 Nov 2025
Reconfigurable Antenna Systems: Advancing Adaptive Wireless Communication
Editorial · 30 Nov 2025
Silicon-Carbide Power Converters: Revolutionizing Efficient Energy Conversion
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Electrical Engineering and Electronic Technology
- SubjectEngineering
- SubjectEnergy & Power
- BylineArticles whose byline prints “Cesar Bacca”
- BylineArticles whose byline prints “Ernesto CordobaNieto”
- BylineArticles whose byline prints “Bibiana Vallejo”
